TP-Link Kasa Smart KS225P3 Bedienungsanleitung


Seiten 2 Nicht kategorisiert

Lies die Bedienungsanleitung für TP-Link Kasa Smart KS225P3 kostenlos online oder lade das PDF herunter. 17 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage

Wire Your Switch
Connect the wires to the smart dimmer
switch as shown below.
4
Disconnect the wires from the old switch.
Ground: Usually green or copper.
Neutral: Usually white and not connected to the dumb switch.
Line: Usually black and coming from the circuit breaker.
Note: If you are unsure, consult a qualied electrician.
Turn o the circuit breaker. Then remove
the old wallplate of the wall switch and
label the and wires.Ground Neutral
1
2
Identify and wires. LineLoad
3
Line up the dimmer switch with the
mounting holes. Secure it with screws.
5
Attach the wallplate and the wiring is
nished. Then turn on the circuit
breaker.
6
Flip the page over to complete setup.
Power
Source
To Light
1) the circuit breaker. Use a voltage detector Turn on
to identify the energized wire (). Line wire
2) the circuit breaker. Label the and Turn oLineLoad
wires.
Take care to avoid electric shocks.
Load wireLine wire
Product Introduction
Kasa smart dimmer switch turns on and
dims the lights automatically, saving you
eort and electricity bills.

Bewerten Sie dieses Handbuch


Produktspezifikationen

Marke: TP-Link
Kategorie: Nicht kategorisiert
Modell: Kasa Smart KS225P3

Brauchst du Hilfe?

Wenn Sie Hilfe mit TP-Link Kasa Smart KS225P3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten