Tripp Lite SMART700DV Bedienungsanleitung

Tripp Lite Unterbrechungsfreies Stromversorgungssystem SMART700DV

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tripp Lite SMART700DV (12 Seiten) in der Kategorie Unterbrechungsfreies Stromversorgungssystem. Dieser Bedienungsanleitung war für 27 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12

Owner’s Manual

1111 W. 35th Street, Chicago, IL 60609 USA

Customer Support: (773) 869-1234 • www.tripplite.com

Important Safety Instructions 2

Quick Installation 3

Basic Operation 5

Storage and Service 8

SMART700DV

Intelligent, Line-Interactive UPS System

• 120V/230V Auto-Sensing Input, 120V Output

Not suitable for mobile applications.

Battery Replacement 9

Optional Installation 4

WARRANTY

REGISTRATION

to win a FREE Tripp Lite product!

www.tripplite.com/warranty

Specifications 10

Warranty Registration 10

Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains important instructions that should be followed during the installation, operation

and storage of all Tripp Lite UPS Systems. Failure to heed these warnings will void your warranty.

UPS Location Warnings

• The UPS is heavy. Use caution when lifting it.

• Install your UPS indoors, away from excess moisture or heat, dust or direct sunlight.

• For best performance, the ambient temperature near your UPS should be between 0° C and

40° C (between 32° F and 104° F).

• Leave adequate space around all sides of the UPS for proper ventilation. Do not obstruct its

vents or fan openings.

UPS Connection Warnings

• The UPS contains its own energy source (battery). The output terminals may be live even

when the UPS is not connected to an AC supply.

• Connect your UPS to a properly grounded AC power outlet. Do not modify the UPS’s plug

in a way that would eliminate the UPS's connection to ground. Do not use adapters that

eliminate the UPS’s connection to ground.

• Do not plug your UPS into itself; this will damage the UPS and void your warranty.

• If you are connecting your UPS to a motor-powered AC generator, the generator must provide

filtered, frequency-regulated computer-grade output. Connecting your UPS to a generator will

void its Ultimate Lifetime Insurance.

Equipment Connection Warnings

• Do not use Tripp Lite UPS Systems for life support applications in which a malfunction or

failure of a Tripp Lite UPS System could cause failure or significantly alter the performance

of a life-support device.

• Do not connect surge suppressors or extension cords to the output of your UPS. This might

overload the UPS and will void the surge suppressor and UPS warranties.

Battery Warnings

• Batteries can present a risk of electrical shock and burn from high short-circuit current.

Observe proper precautions. Do not dispose of the batteries in a fire. Do not open the UPS or

batteries. Do not short or bridge the battery terminals with any object. Unplug and turn off the

UPS before performing battery replacement. Use tools with insulated handles. There are no

user-serviceable parts inside the UPS. Battery replacement should be performed only by

authorized service personnel using the same number and type of batteries (sealed Lead-Acid).

The batteries are recyclable. Refer to your local codes for disposal requirements or in the

USA only call 1-800-SAV-LEAD or 1-800-8-BATTERY (1-800-822-8837) or visit

www.rbrc.com for recycling information. Tripp Lite offers a complete line of UPS System

Replacement Battery Cartridges (R.B.C.). Visit Tripp Lite on the Web at www.tripplite.com to

locate the specific replacement battery for your UPS.

• During hot-swap battery replacement, the UPS will not provide backup power in the event of

a blackout or other power interruptions.

• Do not operate UPS without batteries.

Quick Installation

Plug the UPS into a wall outlet

supplying either 120V or 230V

(nominal) AC power.

Use the included detachable power cord. The IEC-320

end connects to the AC input receptacle on the rear of

the UPS; the NEMA 5-15 end connects to the wall

outlet.

To plug the UPS into a wall outlet that does not accept

a NEMA 5-15 plug, simply replace the included

power cord with a detachable cord from another piece

of equipment, such as a computer. Then, use the includ-

ed power cord to connect the equipment to the UPS.

NOTE! After you plug the UPS into a live AC outlet,

the UPS (in “Standby” mode) will automatically

charge its batteries,* but will not supply power to

its outlets until it is turned ON (see Step 3 below).

* The BATTERY CHARGE LED will be the only LED illuminated.

Plug your equipment into the UPS.

NOTE! Your UPS is designed to support only elec-

tronic equipment. You will overload the UPS if the

total VA ratings for all the equipment you connect

exceeds the UPS's Output Capacity (700VA). To find

your equipment's VA ratings, look on their name-

plates. If the equipment is listed in amps, multiply

the number of amps by 120 to determine VA.

(Example: 1 amp × 120 = 120 VA). If you are unsure if you have overloaded

the UPS's outlets, see “OUTPUT LOAD LEVEL” LED description.

Turn the UPS ON.

Press and hold the “ON/OFF/STANDBY” button for

one second. The alarm will beep once briefly after one

second has passed. Release the button.

Produktspezifikationen

Marke:	Tripp Lite
Kategorie:	Unterbrechungsfreies Stromversorgungssystem
Modell:	SMART700DV
Akustische Signale:	Ja
Breite:	228.6 mm
Tiefe:	317.5 mm
Gewicht:	28120 g
Produktfarbe:	Schwarz
Akkuladezeit:	4 h
Höhe:	260.4 mm
Energieschutzeigenschaften:	Over voltage, Under voltage
Stecker:	NEMA 5-15P
Anzahl USB 2.0 Anschlüsse:	1
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	0 - 95 %
Verpackungsbreite:	362 mm
Verpackungstiefe:	450.8 mm
Verpackungshöhe:	387.4 mm
Paketgewicht:	35380 g
Zertifizierung:	UL1778, CSA, CE, FCC,
Ursprungsland:	Taiwan
Kabellänge:	1.8 m
Gehäusematerial:	Stahl
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-15 - 50 °C
RS-232 port:	1
Anzahl Produkte pro Versandkarton:	1 Stück(e)
Gewicht Versandkarton:	35380 g
Länge des Versandkartons:	450.8 mm
Breite des Versandkartons:	362 mm
Höhe des Versandkartons:	387.4 mm
Formfaktor:	Tower
Ausgangsleistung:	450 W
Nachhaltigkeitszertifikate:	RoHS
Eingangsfrequenz:	50/60 Hz
Kühlung:	Aktiv
Leistungsfaktor:	0.6
Effizienz:	94 %
Anzahl der AC-Ausgänge:	6 AC-Ausgänge
USV-Topologie:	Line-Interaktiv
Eingangs-Betriebsspannung (min):	83 V
Eingangs-Betriebsspannung (max):	230 V
Ausgangskapazität:	0.7 kVA
Ausgangs-Betriebsspannung (min):	120 V
Ausgangs-Betriebsspannung (max):	- V
Automatische Spannungsregulierung:	Ja
Modem (RJ-11) Port:	1
AC-Steckertypen:	NEMA 5–15R
Typische Backup-Zeit bei halber Belastung:	54.5 min
Typische Backup-Zeit bei voller Belastung:	22.2 min
Wellenform:	Sine
Regulierung der Ausgangsspannung:	-21, +8 %
Stromstärke (maximal):	6 A
EMI/RFI Lautstärkefilter:	Ja
Nominale Ausgang Spannung:	120 V
Hot-Swap-Batterie:	Ja
Anzahl der Eingangs-Phasen:	1
Kaltstart:	Ja
Notstrom Aus (EPO):	Ja
Anstieg der Energiemenge:	570 J