Valcom V-1060B Bedienungsanleitung

Valcom Lautsprecher V-1060B

Lies die bedienungsanleitung für Valcom V-1060B (4 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 2 Bewertungen. Hast du eine Frage zu Valcom V-1060B oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/4

VSP-45 Ohm TB Int Spkrs

Issue 8

1 947065

45 OHM TALKBACK INTERIOR SPEAKERS

V-1060A

V- - - -1061 BK, V 1061 W

V- - -1062A, V 1064A. V 1066A

INTRODUCTION

These instructions contain the specifications and

guidelines necessary to install, operate and maintain

the 45 Ohm Talkback Interior Speaker Assemblies.

The 45 Ohm Talkback Interior Speaker Assemblies are

for use with the Valcom "handsfree" talkback page

control units and are for interior use only.

SPECIFICATIONS

Features

• 45 Ohm Impedance

• 8 Inch Speaker

• Easy Hook-up (2 connections using house cable

or station wire)

V- - -1063A, V 1065A, V 1067A

Dimensions/Weight

V-1060A 8.00" Ceiling Speaker

13.00" Diameter x 2.50" D

(33.02cm Diameter x 6.35cm D)

2.5 lbs. (1.13 kg)

V- - -1061 BK Wall Speaker black vinyl with black cloth

grille -

9.60" H x 11.50" W x 4.20" D

(24.38cm H x 29.21cm W x 10.67cm D)

4 lbs. (1.81 kg)

V- - -1061 W Wall Speaker white vinyl with white cloth

grille -

9.60" H x 11.50" W x 4.20" D

(24.38cm H x 29.21cm W x 10.67cm D)

4 lbs. (1.81 kg)

V- -1062A Wall Speaker wood grain with light

brown open weave grille -

10.60" H x 9.70" W x 5.20" D

(26.92cm H x 24.64cm W x 13.21cm D

5.4 lbs. (2.45kg)

V- -1063A Wall Speaker wood grain with dark

brown cloth grille -

10.60" H x 9.70" W x 5.20" D

(26.92cm H x 24.64cm W x 13.21cm D)

4.0 lbs. (1.81 kg)

V- -1064A Corner Speaker wood grain with light

brown open weave grille -

10.50" H x 9.50" W x 6.30" D

(26.67cm H x 24.13cm W x 16.00cm D)

3.7 lbs. (1.68 kg)

V- -1065A Corner Speaker wood grain with dark

brown cloth grille -

10.50" H x 9.50" W x 6.30" D

(26.67cm H x 24.13cm W x 16.00cm D)

3.7 lbs. (1.68 kg)

V- -1066A Corridor Speaker wood grain with light

brown open weave grille -

10.30" H x 10.30" W x 4.20" D

(26.16cm H x 26.16cm W x 10.67cm D)

5.7 lbs. (2.59 kg)

V- -1067A Corridor Speaker wood grain with dark

brown cloth grille -

10.30" H x 10.30" W x 4.20" D

(26.16cm H x 26.16cm W x 10.67cm D)

5.6 lbs. (2.54 kg)

Power Requirements

None

Environment

Temperature: -20 to +55

Humidity: 0 to 95% non-precipitating

SYSTEM DESIGN

General

The 45 Ohm Talkback Speakers are designed to be

used with the Valcom "handsfree" talkback control

units. In combination with these units, they will

provide both loudspeaker and talkback functions.

A standard Valcom talkback paging system is made

up of three basic components:

1. A talkback page control unit

2. Speakers (45 Ohm)

3. A power supply

Consult Valcom's VSP - Handsfree Talkback Paging

(Part # 947099) for detailed information on selecting

the control unit and power supply.

Coverage

The distance you can be away from a speaker and still

have good talkback depends on the type of speaker

and the ambient noise level. In a typical office

environment, a wall speaker (V- -1061 W, V- -1061 BK,

V-1062A, V-1063A, V-1064A, V-1065A, V-1066A,

V-1067A) will cover approximately 600 square feet

when mounted eight feet from the floor. Ceiling

speaker coverage is dependent on ceiling height; the

greater the ceiling height, the larger the area covered.

Machine

Shop

(Noisy)

10' 30'20' 40' 50'

Shipping

(Moderate)

Waiting

Rooms

(Quiet)

Talkback not recommended above 80dB

TYPICAL REPLY DISTANCE CHART

Maximum Talkback Reply Distance

IMPORTANT

The speaker is no better than your ears. If you

cannot carry on a conversation at normal voice

levels over the required talkback distance, then

the talkback page equipment will not function

satisfactorily.

Use common sense when mounting a talkback

speaker. The speaker should be as close as

possible to the area where talkback is desired.

It should not be mounted close to or pointed at,

noise producing equipment such as fans, air

conditioners, machinery or compressors.

Limitations

• Two talkback speakers maximum per zone unless

V-9922A talkback speaker selection units are

used. Refer to the next section for details.

• Two talkback plus 40 one-way amplified speakers

maximum per zone when mixing talkback and

one-way paging.

• 800 feet maximum cable length to speaker from

page control.

NOTE: Do not split pairs to speakers.

• Do not use talkback in noisy areas (80dB or

greater).

V-9922A Talkback Speaker Selection

Units

Valcom recommends that the total number of speakers

per talkback zone be limited to two talkback and forty

one- -way self amplified speakers. The reasoning

behind this recommendation is simple. Whenever a

page is made into a talkback zone, the paging party

will hear audio from all of the talkback speakers in that

zone. If a zone contains more than two talkback

speakers, the talkback audio from the "extra" speakers

will impede the quality of the talkback audio from the

desired speaker. Additionally, there are limits to the

number of talkback speakers that a page control will

actually drive.

Ideally, if a page were made into a talkback zone, all of

the speakers would simply act like "one-way"

speakers except for the one that is closest to the

paged person. Talkback capability can be provided

by utilizing a V-9922A, Talkback Speaker Selection

Unit, for each talkback speaker. A V-9928, Wall

Mount 5 Watt Amplifier, is also required for every six

(6) talkback speakers.

When a page is made, all speakers provide one-way

announcement. In order to respond, the paged party

activates the closest speaker with a press of the

push-button of that speakers associated talkback

speaker selection unit. This activates the chosen

speaker as a talkback speaker and resets any

previously selected speaker. Contact Valcom

Technical Support at (540) 563-2000 for additional

information.

INSTALLATION

Connections

Two conductor twisted wire is required for the 45

Ohm talkback speakers. Standard 22 or 24 gauge

station wire is acceptable. Shielded wire is not

required or recommended. Connections are as

follows:

• Speaker out from page control to speaker tip

• Speaker common to speaker ring

Mounting

V-1060A: Cut an 8.5" diameter hole in ceiling tile.

After connections have been made to the speaker,

attach speaker to ceiling tile using the mounting

hardware provided. NOTE: Where extra speaker

support is needed, a V-9916 or V-9916M Valcom

Bridge and Backbox should be used.

V- -1061 BK, V- -1061 W, V-1062A, V-1063A: After

making the required connections, fasten a suitable

mounting screw (#10 sheet metal screw or similar) to

the wall at the desired location for mounting of the

speaker. Hang the speaker on the screw using the

keyhole on the speaker bracket.

V-1064A, V-1065A: After making the required

connections to the speaker, use appropriate hardware

such as an 8d finishing nail and hang the speaker in

the corner. Typical mounting height would be 8 feet.

V-1066A, V-1067A: Unscrew mounting bracket and

baffle from speaker assembly. Using appropriate

hardware, mount the bracket to the wall. After making

the required connections, reattach the baffle to the

speaker and the speaker to the mounting bracket.

Produktspezifikationen

Marke:	Valcom
Kategorie:	Lautsprecher
Modell:	V-1060B
Tiefe:	63.5 mm
Produktfarbe:	Weiß
Impedanz:	45 Ohm
RMS-Leistung:	12 W
Equalizer:	Nein
Betriebstemperatur:	-20 - 55 °C
Relative Luftfeuchtigkeit in Betrieb:	0 - 95 %
Gehäusematerial:	Stahl
LED-Anzeigen:	Ja
Audio Kanäle:	1.0 Kanäle
Frequenzbereich:	80 - 12000 Hz
Durchmesser:	330 mm
Lautsprecherplatzierung:	Deckenmontage möglich
Lautsprechertyp:	1-Weg