Vaxcel Glenview W0552 Bedienungsanleitung

Vaxcel Beleuchtung Glenview W0552

Lies die bedienungsanleitung für Vaxcel Glenview W0552 (2 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 13 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 7 Bewertungen. Hast du eine Frage zu Vaxcel Glenview W0552 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
W0552
Mounting Plate Unit (A)
Wire Connector (C)
Mounting Screw (B)
Bolt Nut (D)
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. Read and save these instructions.
Hardware Package (included):
Page 1 / 2
Fixture Ground Wire
Wire Connector (C)
Mounting Plate Unit (A)
House Ground Wire
Green Ground Screw
Fixture Wire
Backplate
Mounting Screw (B)
Shade
Socket Ring
Outlet Box
Fixture Mounting Screw
Max. 40W Candelabra Base
(not included)
Socket
Bolt Nut (D)
1. Unscrew the two bolt nuts (D), remove the mounting plate unit (A) from the backplate.
2. Attach the mounting plate unit (A) to the outlet box by using two mounting screws (B). Adjust the length of the
preinstalled fixture mounting screws if necessary.
Note: Make sure that two fixture mounting screws are lined up vertically make the fixture level.
Turn off the power at fuse or circuit box.
Installation Steps
250820


Produktspezifikationen

Marke: Vaxcel
Kategorie: Beleuchtung
Modell: Glenview W0552

Brauchst du Hilfe?

Wenn Sie Hilfe mit Vaxcel Glenview W0552 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten