Vaxcel Seward Park W0504 Bedienungsanleitung

Lies die bedienungsanleitung für Vaxcel Seward Park W0504 (2 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 12 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 6 Bewertungen. Hast du eine Frage zu Vaxcel Seward Park W0504 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. Read and save these instructions.

W0504

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

Hardware Package (included):

1. Unscrew the four set screws (A). Remove the mounting plate from the backplate.

2. Fix the mounting plate to the wall.

2a. For cement and drywall material:

Hold the mounting plate to the outlet box and mark the outermost set holes on the wall surface for drilling.

Remove the mounting plate from the outlet box. Drill two holes. Thread the anchors (E) into the holes,

and then attach the mounting plate to the outlet box by using two mounting screws (B). Secure the drywall

screws (D) through the set holes into the anchors (E).

2b. For wooden material:

Attach the mounting plate to the outlet box by using two mounting screws (B), and then secure the drywall

screws (D) through the set holes to the wall.

Turn off the power at fuse or circuit box.

Set Screw (A)Mounting Screw (B)Wire Connector (C)Anchor (E)Drywall Screw (D)

Page 1 / 2

Installation Steps

241029

Outlet Box

Anchor (E)

Drywall Screw (D)

Mounting Screw (B)

Wire Connector (C)

Fixture Ground Wire

Backplate

Mounting Plate

Set Screw (A)

Glass Holder

Max. 60W Medium

base bulb

(not included)

Produktspezifikationen