Vestil ATD-1622-4 Bedienungsanleitung

Lies die bedienungsanleitung für Vestil ATD-1622-4 (6 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 11 Personen als hilfreich bewertet und erhielt im Schnitt 3.6 Sterne aus 6 Bewertungen. Hast du eine Frage zu Vestil ATD-1622-4 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Rev. 2/15/2013 ATD, Manual.doc

Copyright 2013 Vestil Manufacturing Corp. Page 1 of 6

VESTIL MANUFACTURING CORP.

2999 North Wayne Street, P.O. Box 507, Angola, IN 46703

Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868

Fax: (260) 665-1339

www.vestilmfg.com e-mail: [email protected]

ATDSERIES ADJUSTABLE TOTE DOLLY

I

NSTRUCTION MANUAL

Receiving instructions:

After delivery, IMMEDIATELY remove the packaging from the product in a manner that preserves the packaging and

maintains the orientation of the product in the packaging; then inspect the product closely to determine whether it

sustained damage during transport. If damage is discovered during the inspection, immediately

record a

complete description of the damage on the bill of lading. If the product is undamaged, discard the packaging.

NOTES

:

1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where the product

is used is exclusively the responsibility of the owner/end-user.

2) VESTIL is not liable for any injury or property damage that occurs as a consequence of failing to apply either: a)

the instructions in this manual; or b) information provided on labels affixed to the product. Neither is Vestil

responsible for any consequential damages sustained as a result of failing to exercise sound judgment while

assembling, installing, using or maintaining this product.

Table of Contents

Hazard identification: explanation of signal words……………………………………………………………………. 2

Safety Guidelines…………………………………………………………………………..………………………….….2

Exploded parts diagrams and bills of materials………..……………………………………………………………... 3-4

Label placement diagram …………..

…………………………………………………………...................................5

Limited warranty………………………………………………………………………………………………………….. 6

Produktspezifikationen