Vestil WL-100-5-68 Bedienungsanleitung

Lies die bedienungsanleitung für Vestil WL-100-5-68 (16 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 2 Bewertungen. Hast du eine Frage zu Vestil WL-100-5-68 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

6/25/2015Manual,WL-100.doc

OPERATION &

M

AINTENANCE

M

ANUAL

VESTIL MANUFACTURING CORP.

2999 N. Wayne St., Angola, IN 46703

Ph: 260-665-7586 · Fax: 260-665-1339

E-mail: [email protected]

· www.vestil.com

MODEL WL-100

Pre-installation Instructions ............................................ 2

Installation Instructions ................................................... 3

Routine Maintenance & Safety Checks .......................... 4

Operation Instructions ..................................................... 5

Structural Expl View & BOM ....................................... 6

Power Unit’s Operation .................................................. 7

Motor & Transformer Connections ................................ 8

Electrical Diagrams ..................................................... 9-10

Power Unit Expl Parts Drawing & BOM .................... 11

Manifold Expl View & BOM, Hydraulic Diagram ..... 12

Power Unit Expl View & BOM .................................. 13

Troubleshooting …………………………....….……. 14

Safety Label Identification .......................................... 15

Warranty ………………………………….….……… 16

Material handling is inherently dangerous. To reduce

the likelihood of operator and bystander injury:

oEach person who might operate, use, or maintain this device must

Read and understand this manual in its entirety before operating,

using or performing maintenance on the scissor dock.

oDO NOT work on this device unless it is fully lowered and unloaded

and maintenance props are in place.

oEnsure that all safety and warning labels stay in place and are

legible. See the labels page in this manual.

oThe scissor dock’s frame must be securely anchored in concrete.

See the installation instructions.

oDo not use the lift if any damage or unusual noise is observed.

oAlways watch the platform and any load on it carefully when the lift

is in operation.

oDo not exceed a travel rate of two feet per second when moving

across the platform.

oThe platform’s load ratings must be observed at all times. See the

operation instructions.

oDo no modify the lift without the express, written authorization of

Vestil. Unauthorized modifications might make the scissor lift

unsafe to use.

oDO NOT attempt to repair this scissor lift or perform maintenance on

it unless you are trained and authorized to do so.

oDo not use brake fluid or jack oils in the hydraulic system. If oil is

needed, use an anti-wear hydraulic oil with a viscosity grade of

150 SUS at 100°F, (ISO 32 cSt @ 40°C), or Dexron transmission fluid.

oUse only replacement parts either supplied or approved by the

manufacturer.

WHENORDERING

REPLACEMENT PARTS:

We take pride in using quality

parts on the equipment we

manufacture. We are not

responsible for equipment

problems resulting from the use

of unapproved replacement

parts.

To order replacement or

spare parts for this equipment,

contact the factory.

In any communication with

the factory please be prepared

to provide the machine’s serial

number, which is indicated on

the machine dataplate.

RECEIVING INSTRUCTIONS

Every unit is thoroughly

tested and inspected prior to

shipment. However, it is

possible that the unit could

incur damage during transit.

Inspect the unit closely when

it arrives. If you see evidence

of damage or rough handling to

either the packaging or to the

product when it is being

unloaded, immediately

make a

note of it on the Bill Of Lading!

It is important that you

remove the product’s packaging

upon its arrival to ensure that

there is no concealed damage

or to enable a timely claim with

the carrier for freight damage.

Also, verify that the product

and its specifications are as

ordered.

VESTIL MFG.CO./T&SEQPT.CO.1 of 16

Produktspezifikationen