Vigitron MaxiiFiber Vi5004 Bedienungsanleitung
Vigitron
Nicht kategorisiert
MaxiiFiber Vi5004
Lies die bedienungsanleitung für Vigitron MaxiiFiber Vi5004 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Vigitron MaxiiFiber Vi5004 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2
Vi5004 4-Port Media Converter Installation Manual
Application Drawing
Important Safety Warning
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
IP Camera-end Installation
The Smart Choice for Transmission Solutions www.vigitron.com
Ethernet Switch/NVR-end Installation
- Connect an approved 12VDC power supply to the power connector of
Vi5004. A power adapter connector is provided to simplify connection.
- Connect the RJ45 connector of the Ethernet switch to the 10/100BaseT
Ethernet port of Vi5004 using a standard Cat5/6 cable of maximum
328 feet (100 m) in length.
- Insert a suitable 100MBps SFP into the SFP socket of the Vi5004. The
SFP needs to match the specification of the fiber optics cable.
- Connect one end of the long fiber optic cable to a SFP module.
The Ethernet link, Fiber link, activity LEDs should be "ON" and "Blink" to
indicate the status of each port.
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Install in accordance with the manufacturer’s instructions.
- This installation should be made by a qualified service person and should conform
to all local codes.
- DO NOT bundle UTP or Coax signals in the same conduit as high-voltage wiring.
- To reduce the risk of fire or electrical shock, do not expose these products to rain,
moisture, dripping or splashing.
- No objects filled with liquids, such as vases, shall be placed on Vigitron equipment.
- DO NOT install the unit in a place where the operating ambient tempera ture
exceeds 70° C.
- Make sure that the external power supply output voltage is in the recommended
range.
- Do not install near any heat sources such as radiators, heat registers, stoves or
other apparatus that produce heat.
- Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of
time.
- Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as a power supply cord or plug is
damaged, liquid has been spilled, or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
- The powe plug is used as the disconnect device and shall remain readily operable.
Vi5004-UM
Vigitron’s Vi5004 is a 4-port fiber optic media convertor that enables Ethernet
signals to be transmitted over fiber optic cables. It enable UTP Ethernet to
connect to fiber to meet long distance transmission requirement or where
fiber is already installed. The use of fiber SFPs enables compatibility with all
major single and multimode fiber optics cables to achieve transmission
distances depending on the cable and SFP type. The Vi5004 can use
virtually any MSA compliant SFPs.
The Vi5004 is an ideal solution for converting existing analog fiber
infrastructures to IP systems. It provides a unique, reliable, and cost effective
solution to meet long distance transmission application requirements. Up to
four Vi5004 units can be instaled in a Vi5000R rackmount shelf to povide up
to 16 ports of rack mountable fiber optics media converters.
- Insert a suitable 100MBps SFP into the SFP socket of the Vi5001. The
SFP needs to match the specification of the fiber optics cable.
- Connect the fiber connector of the optical wire to the SFP.
- If the IP Camera is non-PoE use an approved 12VDC or 48VDC power
adapter to power the Vi5001.
- If the IP Camera is PoE enabled use the Vi0017 or another approved
48VDC power adapter to power the Vi5001.
- Connect the IP camera RJ45 connector to the “10/100BaseT Ethernet” port
of Vi5001 using a standard
Cat5/6 cable of maximum 100m in length.
Cat 5/6
Fiber Optics
Network Switch
Adding fiber optic connection to Network switches
Data
Long Distance Fiber
PoE Camera
PoE Camera
Vi5001
Vi5004
Power
Supply
Data
Long Distance Fiber
Vi5001
Power
Supply
Data
Long Distance Fiber
PoE Camera
Vi5001
Power
Supply
Data
Long Distance Fiber
PoE Camera
Vi5001
Power
Supply
Data + PoE
328 ft. (100m)
Data + PoE
328 ft. (100m)
Data + PoE
328 ft. (100m)
Data + PoE
328 ft. (100m)
Power
Supply
The Vi5004 along with Vi5001 enables addging 100Base-T fiber connection to any network
switch. Each port of Vi5004 can be individually powered by PoE or local power supply SFPs
need to be added to Vi5004 and Vi5001 to match the fiber optic cables.
WARNING! - To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture. This apparatus shall not be exposed to
dripping or splashing and no objects filled with liquids, such as vases shall
be placed on the apparatus.
WARNING! - This apparatus is a Class I product. This product must
be connected to a mains socket outlet thru an AC to DC Power supply.
WARNING! - The mains plug is used as the disconnect device and
shall remain readily operable.
Maxii
Fiber
TM
Rack mount four 4-port Vigitron transmission devices
The Vi5000R provies an easy way to rack mount up to four Vi5004s to make a 16 port media
converter. The Vi5000B can be used to cover empty spaces of Vi5000R.
Vi5004
Vi5004
4 x Vi5004 + Vi5000R
Vi5000R
Vi5004
Vi5004
Limited Lifetime Warranty
Vigitron, Inc. warrants that all Vigitron products (“Product”), if used in accordance
with these instructions, will be free of defects in material and workmanship for
lifetime defined as the duration period of time until product end of life is announce-
ment. After which Vigitron will continue to provide warranty services for a period of 3
years. Period covering valid warranty will be determined by proof of purchase in the
form of an invoice from an authorized Vigitron dealer.
Warranty will only be provided for as long as the original end user purchaser owns
the product. Warranty is not transferrable. At Vigitron's option, defective product will
be repaired, replaced or substituted with a product of equal value. This warranty
does not apply if, in the judgment of Vigitron, Inc., the Product fails due to damage
from shipment, handling, storage, accident, abuse or misuse, or if it has been used
or maintained not conforming to Product manual instructions, has been modified, or
serial number removed or defaced. Repair by anyone other than Vigitron, Inc. or an
approved agent will void this warranty. Vigitron, Inc. shall not under any circum-
stances be liable to any person for any incidental, indirect or consequential
damages, including damages resulting from use or malfunction of the product, loss
of profits or revenues or costs of replacement goods. The maximum liability of
Vigitron, Inc. under this warranty is limited to the original purchase price of the
Product only.
Technical Specifications*
Mechanical Drawings
Electrical
Ethernet Standard 10/100BaseT, Auto-Negotiation, Auto
MDI/MDI-X (x4)
Fiber Compatibility Multimode Fiber Optical Cable: 50/125um
Multimode Fiber Optical Cable: 62.5/125um
Single Mode Fiber Optical Cable: 9/125um
Distance Based on cable and SFP
Fiber Connection LC based on SFP (x4)
Connectors Fiber: SFP sockets compliant to MSA standards
Ethernet: 4 x RJ45
Power: Detachable Terminal Block
Status LED Power
Ethernet: Link/Traffic, 10/100Mbps
Fiber Active
Data Interfaces & RFC 768 UDP, RFC 2068 HTTP
Compliances RFC 793 TCP, RFC 791 IP
RFC 1783 TFTP, RFC 894 IP over Ethernet
RFC 2544 TCP/IP Packet Transmission
Standards IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3af, IEEE 802.3at
Power 12VDC @ 0.7A
Regulatory
Safety CE
Environmental RoHS, WEEE
Environmental
Humidity 0 to 95%, non-condensing
Temperature Operating: 0°C to +70°C
Storage: -40°C to +85°C
Mechanical
Dimensions 1.65 x 2.69 x 4.08 in., 4.19 x 6.83 x 10.36 cm (HxWxL)
Weight 0.59lb (266g)
Housing Extruded Aluminum
*Specifications subject to change without notice.
Ordering Information
Status LEDs
© Copyright 2022 Vigitron, Inc.
TEL (+1) 858 - 484 - 5209 • FAX (+1) 858 - 484 - 1205
7810 Trade Street, Suite 100, San Diego, CA 92121, USA • support@vigitron.com • www.vigitron.com
LED Name Color Status Function
OFF Power is OFF
ON Power is ON
OFF No PoE
ON PoE
OFF
Fiber Link is OFF
YELLOW
ON /
FLASHING
Fiber Activity
OFF No connection
FLASHING Connection is OK with Traffic
OFF No connection
ON Connection is OK
Link
(Standard Side)
Power GREEN
PoE
Fiber Port
Traffic
(Standard Side)
GREEN
YELLOW
GREEN
Related Products
Part No.
Description
Ordering Information
Part No.
Description
Vi5001
Single Port Media Convertor with PoE Source
Vi5004
4-Port Media Convertor with PoE Source
Power
Port 1 Port 4Port 2 Port 3
Uplink
PoE Input Link/Activity
Input PoE
30W 60W
SFP
Rear View
Front View
3.75"
9.53cm
1.2"
3.0cm
Vi30005 5-Port PoE Powered 1G PoE Switch
Power Input
12/57VDC ---
Produktspezifikationen
| Marke: | Vigitron |
| Kategorie: | Nicht kategorisiert |
| Modell: | MaxiiFiber Vi5004 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Vigitron MaxiiFiber Vi5004 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Vigitron
19 Juni 2025
19 Juni 2025
18 Juni 2025
Bedienungsanleitung Nicht kategorisiert
- Vivitar
- Gianni Ferrari
- Verbatim
- Prem-i-air
- Aruba
- SiriusXM
- Livington
- Leynew
- Strex
- CUPRA
- Zedar
- NZR
- Adventure Kings
- Newline
- Dream
Neueste Bedienungsanleitung für -Kategorien-
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025