Whirlpool WH6PC11BS7A0 Bedienungsanleitung
Seiten 28 Spülmaschine
Lies die Bedienungsanleitung für Whirlpool WH6PC11BS7A0 kostenlos online oder lade das PDF herunter. 64 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
ENQuick Guide
1
FILLING THE SALT RESERVOIR
The use of salt prevents the formation of LIMESCALE on the dishes and on
the machine’s functional components.
• It is mandatory that the salt reservoir never be empty.
• It is important to set the water hardness.
The salt reservoir is located in the lower part of the dishwasher and must be
lled when the SALT REFILL indicator light in the control panel is lit.
1. Remove the lower rack and unscrew the reservoir cap
(anticlockwise).
2. Only the rst time you do this: ll the salt reservoir
with water.
3. Position the funnel (see gure) and ll the salt reservoir
right up to its edge (approximately 1 kg); it is not unu-
sual for a little water to leak out.
4. Remove the funnel and wipe any salt residue away from the opening.
Make sure the cap is screwed on tightly, so that no detergent can get into
the container during the wash program (this could damage the water sof-
tener beyond repair).
Whenever you need to add salt, it is mandatory to complete the pro-
cedure before the beginning of the washing cycle to avoid corrosion.
WATER SOFTENING SYSTEM
Water softener automatically reduces water hardness, consequently prevent-
ing scale buildup on heater, contributing also to better cleaning eciency.
This system regenerates itself with salt, therefore it is required to rell
salt container when empty.
Frequency of regeneration depends on water hardness level setting - regen-
eration takes place once per 6 Eco cycles with water hardness level set to 3.
Regeneration process starts in nal rinse and nishes in drying phase, be-
fore cycle ends.
• Single regeneration consumes: ~3.5L of water;
• Takes up to 5 additional minutes for the cycle;
• Consumes below 0.005kWh of energy.
A
C
D
FILLING THE RINSE AID DISPENSER
Rinse aid makes dish DRYING easier. The rinse aid
dispenser A should be lled when the RINSE AID
REFILL indicator light in the control panel is lit.
NEVER pour the rinse aid directly into the appli-
ance tub.
FILLING THE DETERGENT DISPENSER
To open the detergent dispenser use the opening device C. Introduce the
detergent into the dry dispenser D only. Place the amount of detergent for
pre-washing directly inside the tub. If all-in-one detergents are used, we
recommend using the TABLET button, because it adjusts the program so
that the best washing and drying results are always achieved.
Usage of detergent not designed for dishwashers may cause malfunc-
tion or damage to the appliance.
Program
Programs description
Drying
phase
NaturalDry
Available options
*)
Duration
of wash
program
(h:min)
**)
Water
con-
sumption
(litres/cycle)
Energy
con-
sumption
(kWh/cycle)
1.
Eco 50°- Program is suitable to clean normally soiled tableware, that for
this use, it is the most ecient programme in terms of its combined en-
ergy and water consumption, and that it is used to assess compliance
with the EU Ecodesign legislation.
3:358.70.63
2.
Intensive65° - Program recommended for heavily soiled crockery, es-
pecially suitable for pans and saucepans.
2:4517.51.60
3.
6th Sense® 50-60°- For normally soiled dishes with dried food residues.
Senses the level of soiling on the dishes and adjusts the program ac-
cordingly.
1:20 - 3:007.0 - 14.00.70 - 1.10
4.
Fast Wash&Dry 50°
- Normally soiled crockery. Everyday cycle, that ensu-
res optimal cleaning and drying performance in shorter time.
1:2511.51.10
5.
Crystals45° - Program for delicate items, which are more sensitive to
high temperatures, for example glasses and cups.
1:4012.01.20
6.
Rapid 30’45° - Program to be used for half load of lightly-soiled dishes
with no dried food residues. Without drying.
-
0:309.00.50
7.
Silent
50° - Suitable for night-time operation of the appliance. With the
lowest noise.
3:3016.01.15
8.
Sanitizing 65° - Normally or heavily soiled crockery, with additional anti-
bacterial wash. Can be used to perform maintenance of the dishwasher.
-
1:5012.01.30
9.
Prewash - Use to refresh crockery planned to be washed later.
No detergent to be used with this program.
--
0:104.50.01
CONTROL PANEL
FIRST TIME USE
More information in the Daily Reference Guide on website.
PROGRAMS TABLE
1. On-O / Reset button with indicator light
2. Program selection button with indicator light
3. Multizone button with indicator light / Keylock
4. Eco program indicator light
5. Keylock indicator light
6. Display
7. Program number and remaining time indicator
8. Tablet (Tab) indicator light
9. Closed water tap indicator light
10. Rinse Aid rell indicator light
11. Salt rell indicator light
12. Power Clean® button with indicator light / Tablet (Tab)
13. Delay button with indicator light
14. Start/Pause button with indicator light / Drain out
3
1
2
8
13
14
5
4
6
71112
9
10
THANK YOU FOR BUYING AWHIRLPOOL PRODUCT.
In order to receive amore complete assistance, please
register your appliance on: www.whirlpool.eu/register
PLEASE SCAN THE
QR CODE ON YOUR
APPLIANCE IN
ORDER TO HAVE
MORE DETAILED
INFORMATION
Before using the appliance carefully read Safety and Installation Instructions.
After installation, please remember to remove all transport protection parts from
the dishwasher.
Fehlercodes Whirlpool WH6PC11BS7A0
Fehlercodes aus der offiziellen Bedienungsanleitung, mit Bedeutung und Lösung.
| Code | Bedeutung | Lösung | Seite |
|---|---|---|---|
| F15 | Der Geschirrspüler beendet frühzeitig das Programm. Die LEDs Ein-Aus und START/Pause blinken rasch. | Kontrollieren Sie, ob das Ende des Abflussschlauches auf der korrekten Höhe positioniert ist. Kontrollieren Sie, ob Wasser in das Abwassersystem angesaugt wird, installieren ggf. ein Belüftungsventil. Kontrollieren Sie die Wasserversorgung auf Lecks oder andere Probleme, die einen Lufteintritt verursachen. | 12 |
| F6 | Der Geschirrspüler lädt kein Wasser. Die LEDs Ein-Aus und START/Pause blinken rasch. | Sicherstellen, dass Wasser im Wassernetz ist oder der Wasserhahn läuft. Sicherstellen, dass der Zulaufschlauch nicht geknickt ist, den Geschirrspüler neu programmieren und wieder einschalten. Falls das Sieb im Zulaufschlauch verstopft ist, dieses reinigen, den Geschirrspüler ausschalten und ein neues Programm starten. | 12 |
Alle Fehlercodes Whirlpool Spülmaschine
Produktspezifikationen
| Marke: | Whirlpool |
| Kategorie: | Spülmaschine |
| Modell: | WH6PC11BS7A0 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Whirlpool WH6PC11BS7A0 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Spülmaschine Whirlpool
Whirlpool WH6IC16B4M6T0 Bedienungsanleitung Whirlpool WH6FC11BS7A0X Bedienungsanleitung Whirlpool WH6PB10BS7A0 Bedienungsanleitung Whirlpool WH2IC10BS7LA0 Bedienungsanleitung Whirlpool WH8IA115B2M3TUS0 Bedienungsanleitung Whirlpool WH6IC11BS7LSA0 Bedienungsanleitung Whirlpool WH6IC11BS7LA0 Bedienungsanleitung Whirlpool WH7FA14BN7A0X Bedienungsanleitung
Alle Whirlpool Spülmaschine Bedienungsanleitungen
Beliebt in Spülmaschine
Whirlpool WFC3B16X Bedienungsanleitung Whirlpool ADG 110 Bedienungsanleitung Whirlpool ADG 4620 IX Bedienungsanleitung
Bedienungsanleitung Spülmaschine
Neueste Bedienungsanleitungen für Spülmaschine
Bosch SHX78DC5N Bedienungsanleitung Asko DWC67423FI Bedienungsanleitung BEKO BDFN16420S Bedienungsanleitung Asko DFI8557MMXXL Bedienungsanleitung BEKO BDSN36561XP Bedienungsanleitung BEKO BDW203 Bedienungsanleitung BEKO BDFN26560GBP Bedienungsanleitung Asko DWC67423BIW Bedienungsanleitung Asko DWC67422BIW Bedienungsanleitung BEKO BDSN26440X Bedienungsanleitung