American Standard Berwick T430702.002 Bedienungsanleitung

Lies die bedienungsanleitung für American Standard Berwick T430702.002 (2 Seiten) kostenlos online; sie gehört zur Kategorie Duschsystem. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 8 Bewertungen. Hast du eine Frage zu American Standard Berwick T430702.002 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

ON/OFF VALVE TRIM

Installation

Instructions

T430.700

T430.702

BERWICK

™

Thank you for selecting American-Standard...the

benchmark of fine quality for over 100 years.

To ensure that your installation proceeds smoothly--please

read these instructions carefully before you begin.

Certified to comply with ANSI A112.18.1M

ASSE 1016

ROUGHING-IN DIMENSIONS

Recommended Tools

Flat Blade Screwdriver

Phillips Screwdriver

Remove as much surface dirt and film using clear

water and soft cotton cloth

(as described above).

Use any of the following to remove tough surface

film and build-up:

Mild liquid detergents

Clear ammonia free liquid glass cleaners

Non-acidic, non-abrasive gentle liquid or fully

dissolved powder cleansers mixed according to

manufacturers directions.

Non-abrasive liquid polishers

Once clean, rinse faucet again with clear water to

thoroughly remove cleaner or polish and blot dry with

a soft cotton cloth.

To keep your new faucet looking new, please follow

these simple care instructions:

DO: Simply rinse the faucet clean with clear water.

Dry the faucet with a soft cotton cloth.

DO NOT:

Do not use any abrasive cleaners, cloths, or

paper towels.

Do not use any cleaning agents containing

acids, polish abrasives, or harsh cleaners or

soaps.

Regular and routine cleaning will reduce the need for

heavy cleaning and polishing. If heavy cleaning is

required, the following procedures are recommended:

CARE INSTRUCTIONS:

Failure to follow these care instructions may

damage the Faucet's finish.

M965001

FINISHED

WALL

LEVER

HANDLE

CROSS

HANDLE

2-3/8" ± 1/2"

(60mm±13mm)

1-3/8" - 2-3/8"

(35mm-59mm)

UNION INLET

1/2" - 14 NPT

OR

5/8" O.D.

COPPER SWEAT

1/2" (13mm) NPT

FEMALE

OUTLET

1/2" NPT3/4" NPT

R701R711

FINISHED

WALL

3/4" NPT

FEMALE THREADED

INLET

3/4'' (19mm) NPT

MALE THREADED

OUTLET

1-1/2"

(38mm)

2-1/8"

(55mm)

2"

(51mm)

2-1/8"

(52mm)

DIA. HOLE

2-1/8"

(52mm)

DIA. HOLE

2-3/4"

(70mm)

2-1/2"

(64mm)

3-1/8"

(79mm)

2

-3/4"

(

70mm)

2-3/4"

(70mm)

Produktspezifikationen