APC SMX3000HV-BNDL Bedienungsanleitung

APC Unterbrechungsfreies Stromversorgungssystem SMX3000HV-BNDL

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für APC SMX3000HV-BNDL (20 Seiten) in der Kategorie Unterbrechungsfreies Stromversorgungssystem. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/20

Operation Manual

Smart-UPS™ X

Uninterruptible Power Supply

Tower/Rack-Mount 4U

Low Voltage

SMX2000LV

SMX2000LVNC

SMX3000LV

SMX3000LVNC

High Voltage

SMX2200HV

SMX3000HV

SMX3000HVT

SMX3000HVNC

su0787a

Smart-UPS X 2000/2200/3000 Vac XL 120/208/230/240 VA Tower/Rack-Mount 4U 1

Overview

Product Description

The APC™ by Schneider Electric Smart-UPS™ is a high performance uninterruptible power supply (UPS). The

UPS provides protection for electronic equipment from utility power blackouts, brownouts, sags, and surges, small

utility power fluctuations and large disturbances. The UPS also provides battery backup power for connected

equipment until utility power returns to safe levels or the batteries are fully discharged.

This user manual is available on the enclosed CD and on the APC by Schneider Electric Web site, www.apc.com.

Important Safety Messages

Read the instructions carefully to become familiar with the equipment before trying to install, operate, service or

maintain it. The following special messages may appear throughout this manual or on the equipment to warn of

potential hazards or to call attention to information that clarifies or simplifies a procedure.

The addition of this symbol to a Caution product safety label indicates that a hazard exists that can

result in injury and product damage if the instructions are not followed.

The following safety messages may appear throughout this manual to warn of potential hazards.

Safety and General Information

Inspect the package contents upon receipt. Notify the carrier and dealer if there is any

damage.

Read the Safety Guide supplied with this unit before installing the UPS.

• Adhere to all local and national electrical codes.

• This UPS is intended for indoor use only.

• Do not operate this UPS in direct sunlight, in contact with fluids, or where there is excessive dust or

humidity.

• Be sure the air vents on the UPS are not blocked. Allow adequate space for proper ventilation.

• The battery typically lasts for three to five years. Environmental factors impact battery life. Elevated

ambient temperatures, poor quality utility power, and frequent short duration discharges will shorten battery

life.

• Connect the UPS power cable directly to a wall outlet. Do not use surge protectors or extension cords.

• The batteries are heavy. Remove the batteries prior to installing the UPS in a rack.

• Always install external battery packs (XLBPs) at the bottom of the rack. The UPS must be installed above

the XLBPs.

• The UPS display interface will recognize as many as 10 external battery packs connected to the UPS.

However there is no limit to the number of XLBPs that can be used with the UPS.

• Refer to “Specifications” on page 2 for UPS and battery weight.

CAUTION

CAUTION indicates a potentially hazardous situation which, if not avoided, can result in equipment damage and minor or

moderate injury.

CAUTION

CAUTION indicates a potentially hazardous situation which, if not avoided, can result in equipment damage.

Smart-UPS X 2000/2200/3000 Vac XL 120/208/230/240 VA Tower/Rack-Mount 4U 2

Specifications

For additional specifications, refer to the APC by Schneider Electric Web site at www.apc.com.

Temperature

Operating 0° to 40° C (32° to 104° F)

Storage -15° to 45° C (5° to 113° F)

charge UPS battery every six months

Maximum

Elevation

Operating 3,000 m (10,000 ft)

Storage 15,000 m (50,000 ft)

Humidity

0% to 95% relative

humidity,

non-condensing

0° to 40° C (32° to 104° F)

Battery Maintenance free,

sealed lead acid

Battery cartridge weight: 23.8 kg (52.4 lb)

UPS weight: 17.2 kg (38 lb)

UPS + battery cartridge weight: 41 kg (90.4 lb)

SMX120BP chassis weight: 13.24 kg (29.2 lb)

SMX120BP chassis + battery cartridge weight: 47.54 kg (104.8 lb)

Produktspezifikationen

Marke:	APC
Kategorie:	Unterbrechungsfreies Stromversorgungssystem
Modell:	SMX3000HV-BNDL
Display-Typ:	LCD
Akustische Signale:	Ja
Breite:	178 mm
Tiefe:	483 mm
Gewicht:	38640 g
Produktfarbe:	Schwarz
Akku-/Batterietyp:	APCRBC143
Akkuladezeit:	3 h
Akku-/Batterietechnologie:	Plombierte Bleisäure (VRLA)
Höhe:	432 mm
Anzahl USB 2.0 Anschlüsse:	1
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	0 - 95 %
Verpackungsbreite:	586 mm
Verpackungstiefe:	633 mm
Verpackungshöhe:	330 mm
Paketgewicht:	47730 g
Zertifizierung:	C-tick, CE, CSA, EN 50091-1, EN 50091-2, EN 60950, FCC Part 15 Class A, GOST, IRAM, UL 1778, VDE\r\nREACH
Kabellänge:	1.83 m
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-15 - 45 °C
Luftfeuchtigkeit bei Lagerung:	0 - 95 %
Geräuschpegel:	55 dB
RS-232 port:	1
Formfaktor:	Rackmount
Ausgangsleistung:	2700 W
Nachhaltigkeitszertifikate:	RoHS
Eingangsfrequenz:	47/63 Hz
Höhe bei Betrieb:	0 - 3000 m
Effizienz:	98.5 %
Anzahl der AC-Ausgänge:	10 AC-Ausgänge
USV-Topologie:	Line-Interaktiv
Eingangs-Betriebsspannung (min):	140 V
Eingangs-Betriebsspannung (max):	280 V
Ausgangskapazität:	3 kVA
Ausgangs-Betriebsspannung (min):	208 V
Ausgangs-Betriebsspannung (max):	240 V
AC-Steckertypen:	C13 coupler, C19 coupler
Typische Backup-Zeit bei halber Belastung:	- min
Typische Backup-Zeit bei voller Belastung:	- min
Wellenform:	Sine
Druckanstiegsschutz:	Ja
Nominale Eingang Spannung:	208-230 V
Nominale Ausgang Spannung:	230 V
Rack-Kapazität:	4U
Hot-Swap-Batterie:	Ja
Höhe bei Lagerung:	0 - 15000 m
Ausgang Anschlüsse:	8 x C13 & 2 x C19
Eingang Verbindungstyp:	BS1363A & IEC-320 C20 & Schuko CEE 7/EU1-16P
Crest-Faktor:	3:1
Notstrom Aus (EPO):	Ja
Auto-Neustart:	Ja
Automatischer Batterietest:	Ja
Anzahl der Output IEC Jumper:	2
Anstieg der Energiemenge:	645 J