Axxess AXDIS-FD3 Bedienungsanleitung

Lies die bedienungsanleitung für Axxess AXDIS-FD3 (16 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 5 Bewertungen. Hast du eine Frage zu Axxess AXDIS-FD3 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

AXDIS-FD3

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 11/22/24 INSTAXDIS-FD3

FORD

Bronco ...........................................................................................2021-2023

E Series .........................................................................................2021-2022

Eco Sport (w/ Harmon Kardon) ................................................ 2020-2022

Escape .........................................................................................2020-2023

F250/F350/F450/F550 (w/4.3” screen) .............................................2020

Maverick ......................................................................................2022-2023

Transit/Transit Connect ............................................................. 2020-2023

INTERFACE FEATURES

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink

• Tape

• Wire cutter

• Zip-ties

TABLE OF CONTENTS

Connections ........................................................2-3

Installation .............................................................3

Programming .........................................................3

Steering wheel control (SWC) settings............4-7

LED feedback ........................................................4

Changing radio type ............................................5

Remapping SWC ..................................................6

Dual assignment instructions .............................7

Troubleshooting.....................................................8

Ford Data Interface with SWC 2020-2023

• Designed for non-amplified models*

• Provides accessory power (12-volt 10-amp)

• Retains R.A.P. (Retained Accessory Power)

• Provides NAV outputs (parking brake, reverse, speed sense)

• Retains audio controls on the steering wheel

• Retains balance and fade

• Micro-B USB updatable

•

Retains factory backup camera on (Transit/Transit Connect Vehicles w/SYNC

®

)

* AXA2B-FD1 required to retain OEM amplifier

Note: The AXDIS-FD3 does not retain SYNC

®

.

INTERFACE COMPONENTS

• AXDIS-FD3 interface

• AXDIS-FD3 harness

• 16-pin harness

• 3.5mm adapter

APPLICATIONS

Product Info

Visit AxxessInterfaces.com for up-to-date vehicle specific applications.

ATTENTION: With the key out of the

ignition, disconnect the negative battery

terminal before installing this product. Ensure

that all installation connections, especially the

air bag indicator lights, are plugged in before

reconnecting the battery or cycling the ignition

to test this product.

NOTE: Refer also to the instructions included

with the aftermarket radio.

www.MetraOnline.com

MetraOnline.com may be used

to assist with dash assembly

instructions. Simply enter your

Year, Make, Model vehicle into

the vehicle fit guide and look

for the Dash Kit Installation

Instructions.

Produktspezifikationen