Axxess AXVT Bedienungsanleitung

Lies die bedienungsanleitung für Axxess AXVT (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 9 Bewertungen. Hast du eine Frage zu Axxess AXVT oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

AXVTAXVT

INSTALLATION INSTRUCTIONSINSTALLATIONINSTRUCTIONS

AXVTAXVT

INSTALLATIONINSTRUCTIONSINSTALLATIONINSTRUCTIONS

REV. 12/13/19REV. 12/13/19© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION

Integrate • AxxessInterfaces.comIntegrate • AxxessInterfaces.com

REV. 12/13/19REV. 12/13/19© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION

Integrate • AxxessInterfaces.comIntegrate • AxxessInterfaces.com

• Provides 12-volts DC output when voltage is at or above 13.5-volts DC

• Designed for vehicles that do not provide accessory (switched) power

• 10-amp fuse included for safety

• Provides accessory power (13.5-volts 10-amps)

• Delayed turn-off after vehicle has been turned off

• Provides 12-volts DC output when voltage is at or above 13.5-volts DC

• Designed for vehicles that do not provide accessory (switched) power

• 10-amp fuse included for safety

• Provides accessory power (13.5-volts 10-amps)

• Delayed turn-off after vehicle has been turned off

• Provides 12-volts DC output when voltage is at or above 13.5-volts DC

• Designed for vehicles that do not provide accessory (switched) power

• 10-amp fuse included for safety

• Provides accessory power (13.5-volts 10-amps)

• Delayed turn-off after vehicle has been turned off

• Provides 12-volts DC output when voltage is at or above 13.5-volts DC

• Designed for vehicles that do not provide accessory (switched) power

• 10-amp fuse included for safety

• Provides accessory power (13.5-volts 10-amps)

• Delayed turn-off after vehicle has been turned off

INTERFACE FEATURES

INTERFACE FEATURES

INTERFACE FEATURES

INTERFACE FEATURES

• Crimping tool and connectors, or solder gun, solder, and heat shrink

• Tape • Wire cutter • Zip ties

• Crimping tool and connectors, or solder gun, solder, and heat shrink

• Tape • Wire cutter • Zip ties

• Crimping tool and connectors, or solder gun, solder, and heat shrink

• Tape • Wire cutter • Zip ties

• Crimping tool and connectors, or solder gun, solder, and heat shrink

• Tape • Wire cutter • Zip ties

• Connect the Black wire to chassis ground.

• Connect the Yellow wire to battery power.

• Connect the Red wire to the aftermarket device's accessory (switched) power wire.

• Connect the Blackwire to chassis ground.

• Connect the Yellowwire to battery power.

• Connect the Redwire to the aftermarket device's accessory (switched) power wire.

• Connect the Blackwire to chassis ground.

• Connect the Yellowwire to battery power.

• Connect the Redwire to the aftermarket device's accessory (switched) power wire.

• Connect the Blackwire to chassis ground.

• Connect the Yellowwire to battery power.

• Connect the Redwire to the aftermarket device's accessory (switched) power wire.

TOOLS REQUIRED

TOOLS REQUIRED

TOOLS REQUIRED

TOOLS REQUIRED

CONNECTIONS TO BE MADE

CONNECTIONS TO BE MADE

CONNECTIONS TO BE MADE

CONNECTIONS TO BE MADE

AXVT Accessory Provider

AXVT Accessory Provider

AXVT Accessory Provider

AXVT Accessory Provider

CAUTION! All accessories, switches, climate controls panels, and especially air bag

indicator lights must be connected before cycling the ignition. Also, do not remove

the factory radio with the key in the on position, or while the vehicle is running.

CAUTION!All accessories, switches, climate controls panels, and especially air bag

indicator lights must be connected before cycling the ignition. Also, do not remove

the factory radio with the key in the on position, or while the vehicle is running.

CAUTION!All accessories, switches, climate controls panels, and especially air bag

indicator lights must be connected before cycling the ignition. Also, do not remove

the factory radio with the key in the on position, or while the vehicle is running.

CAUTION!All accessories, switches, climate controls panels, and especially air bag

indicator lights must be connected before cycling the ignition. Also, do not remove

the factory radio with the key in the on position, or while the vehicle is running.

Produktspezifikationen