Blustream Dante DA11ADE-V2 Bedienungsanleitung
Seiten 4 Nicht kategorisiert
Lies die Bedienungsanleitung für Blustream Dante DA11ADE-V2 kostenlos online oder lade das PDF herunter. Diese Anleitung wurde 14 Mal aufgerufen. Frage zu diesem Modell? Stelle eine Frage
DA11ADE-V2QUICK REFERENCE GUIDE
01
Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk
Our DA11ADE-V2 has been designed to decode two Dante® digital signals to two
unbalanced or balanced analogue audio channels. The DA11ADE-V2 is a plug
& play device that is powered using either PoE (Power Over Ethernet) from any
PoE network switch or via local a 12V power supply input. The DA11ADE-V2 also
supports AES67 RTP audio transport. The in-built web interface module can be
used for configuration and control of the device.
Introduction
DA11ADE-V2
Quick Reference Guide
• Decodes two Dante® digital signals to two unbalanced or balanced analogue audio channels
• Supports 44.1, 48, 88.2 & 96 KHz sample rates @ 16/24/32 Bit
• Configurable Dante® device latency (supports 2-10ms configurable using Dante® Controller)
• Supports AES67 RTP audio transport
• Web interface module for control and configuration of the device
• Features Class 0 802.3af PoE for powering of product from any PoE switch
• Local 12V power supply input for when network switch does not support PoE*
* PS121PH power supply sold separately
FEATURES:
Connections:
1Dante® Audio Input - RJ45 socket connects Dante® network.
2DC Input - Connect to +12VDC power supply (not supplied) if
device is not powered via a PoE switch
3Audio Output - Phoenix Connector accepts balanced or
unbalanced 2 channel audio output.
Front Panel
1
Rear Panel
3
Wiring Configuration
Balanced - XLR
Unbalanced - RCA
+
-
-
+
2
Produktspezifikationen
| Marke: | Blustream |
| Kategorie: | Nicht kategorisiert |
| Modell: | Dante DA11ADE-V2 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Blustream Dante DA11ADE-V2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten