Canarm LOL392 Bedienungsanleitung
Seiten 2 Beleuchtung
Lies die Bedienungsanleitung für Canarm LOL392 kostenlos online oder lade das PDF herunter. 31 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
LED OUTDOOR
LIGHTING
INSTALLATION:
LOL392
03/19
Tel: (613) 342-5424, Fax: (800) 263-4598
1.Unscrew the glass
cylinder
and guard. Unscrew the wiring
box cover.
Attach the wiring box to the
mounting surface.
Select the screw hole to
remove the big screw on wiring
box.
Attach conduit to the hole that
the big screw is removed and
pull the supply lead wires to
wiring box.
Seal around the conduit
according to NEC / CEC
procedures.
Make sure to close the open
hole tightly by using the big
screw removed.
2.Connect the ground wire
(bare copper or green) from
supply lead wire to the ground
screw in the wiring box.
Connect black wire from fixture
to black supply wire and
connect the white wire from
fixture to white supply wire.
NOTE: Ensure the gasket is
properly installed while
tightening the fixture.
3.Attach the gasket and
the fixture to the wiring box
using screws provided.
4. Reverse the process of
step1 to install the glass
cylinder and guard.
5. After installation, apply
a small amount of
weather resistant caulking
around the side perimeter
and the 4 holes as shown.
TOOLS AND MATERIALS REQUIRED:
Phillips
Screwdriver
Wire Cutters
PliersWrench
Wiring supplies
as required by
local electrical
code
QUESTIONS OR CONCERNS CONTACT AT:
1-800-265-1833 (English) / 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
SAFETY PRECAUTIONS:
Glass
Guard
Screw
Gasket
Wiring
Box
Wiring
Box
White Wire
Black Wire
House Supply
Ground Wire
Wheather Resistant
Caulking
(not included)
Wiring Box
Cover
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION
CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND
THE HAZARDS INVOLVED.
3. CONNECT THE GROUND WIRE (BARE COPPER OR GREEN) FROM SUPPLY LEAD WIRE TO THE GROUND
SCREW IN THE WIRING BOX.
4. NOT FOR USE IN LUMINAIRES CONTROLLED BY A DIMMER.
5. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH
A CLEAN, SOFT CLOTH.
6. MOUNT FIXTURE TO SURFACE AT LEAST 4 FEET (1.2 m) ABOVE THE GROUND. FIXTURE MUST BE USED
WITH GLASS GLOBE.
NOTE: Product may not look exactly as shown in figures.
dimmable
This LED light is suitable to be dimmed by
LEVITON# 742-6672-HLW, 722-6674-PDW MAX 150 W, Lutron # SCL-153PH-WH MAX 150 W.
The MAX rated wattage of this model is 13 W
Produktspezifikationen
| Marke: | Canarm |
| Kategorie: | Beleuchtung |
| Modell: | LOL392 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Canarm LOL392 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Beleuchtung Canarm
Canarm Seager IOL600 Bedienungsanleitung Canarm Lohan IOL254 Bedienungsanleitung Canarm Louis IOL405 Bedienungsanleitung Canarm Owynn IOL607 Bedienungsanleitung Canarm Elm IOL402 Bedienungsanleitung Canarm Tay IOL309 Bedienungsanleitung Canarm Marcella IOL322 Bedienungsanleitung Canarm LOL387 Bedienungsanleitung
Alle Canarm Beleuchtung Bedienungsanleitungen
Beliebt in Beleuchtung
Canarm IPL318A03AL Bedienungsanleitung Canarm LCL161A04CWGBK Bedienungsanleitung Canarm Novalee IPL1130A01GD Bedienungsanleitung
Bedienungsanleitung Beleuchtung
Neueste Bedienungsanleitungen für Beleuchtung
Progress Lighting P804003 Bedienungsanleitung NightStick NSR-9910 Bedienungsanleitung NightStick XPR-5572GA Bedienungsanleitung Progress Lighting P560078 Bedienungsanleitung NightStick XPR-5568GX Bedienungsanleitung NightStick XPR-5561G Bedienungsanleitung Progress Lighting P560286 Bedienungsanleitung Progress Lighting P560021 Bedienungsanleitung Quoizel JOU5025PN Bedienungsanleitung Kogan KAPCLAMPRCA Bedienungsanleitung