Canarm Novalee IPL1130A01GD Bedienungsanleitung
Seiten 2 Beleuchtung
Lies die Bedienungsanleitung für Canarm Novalee IPL1130A01GD kostenlos online oder lade das PDF herunter. 34 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
PENDANT
LIGHT
1. Install the length of rod that is
required by threading wire
through the rod and screwing it to
the fixture. Screw the canopy to
the fixture.
2. Loosen “B”. Adjust stud to
desired length and lock in place
with “B”.
3. Mount the mounting bracket
to electrical box using electrical
box screws (not included). Make
sure the studs on the mounting
bracket are facing out from the
electrical box.
4.Connect the ground wires
(bare copper or green) from your
fixture to the ground wire (bare
copper or green) or ground screw
in the electrical box. Connect the
black wire (or wire with marking)
from the fixture to the black wire in
the electrical box and connect the
white wire from the fixture to the
white wire in the electrical box.
5.Once connections of wires
are completed, carefully tuck
wires and wire nuts into the
electrical box making sure no bare
wire (on the black and white) is
visible at the wire nuts.
6. Position fixture over studs on
mounting bracket assembly.
Secure fixture in place with star
washers and cap nuts.
7. Remove spinner nut and
support bracket from socket.
Position glass on lamp and
secure with spinner nut and
support bracket. (Please check
the glass before installing for
any cracks. Do not overtighten
the spinner nut to attach the
glass to the fixture.)
8. Install specified bulb type and
wattage (not included).
White
Black
House supply
Ground wire
Fixture
Ground wire
Tel: (613) 342-5424, Fax: (800) 263-4598
IPL1130A01
10/22
Star
Washer
Cap
Nut
Fixture
Stud
“B”
Studs
Electrical Box Screws
(not included)
Electrical
Box
Mounting
Bracket
Rod
Canopy
Fixture
Phillips
Screwdriver
Wire Cutters
PliersWrench
!
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Wiring supplies
as required by
local electrical
code
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE
BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
3. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND
WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL BOX.
4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A
CLEAN, SOFT CLOTH.
NOTE: Product may not look exactly as shown in figures.
INSTALLATION:
SAFETY PRECAUTIONS:
TOOLS AND MATERIALS REQUIRED:
Bulb
Glass
Spinner
Nut
Support
Bracket
Produktspezifikationen
| Marke: | Canarm |
| Kategorie: | Beleuchtung |
| Modell: | Novalee IPL1130A01GD |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Canarm Novalee IPL1130A01GD benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Beleuchtung Canarm
Canarm Arden IPL707A01GPH Bedienungsanleitung Canarm Javi LVL255A05CH Bedienungsanleitung Canarm Leona IPL2036B01BK Bedienungsanleitung Canarm Bryant IOL598BK Bedienungsanleitung Canarm Gilda LFM112A13BN Bedienungsanleitung Canarm LCL161A04CWG Bedienungsanleitung Canarm IPL705A01BN Bedienungsanleitung Canarm LCL161A04CWGBK Bedienungsanleitung
Alle Canarm Beleuchtung Bedienungsanleitungen
Beliebt in Beleuchtung
Canarm IPL318A03AL Bedienungsanleitung Canarm LOL392 Bedienungsanleitung Canarm Owynn IOL607 Bedienungsanleitung
Bedienungsanleitung Beleuchtung
Neueste Bedienungsanleitungen für Beleuchtung
IKEA MOLNART 406.212.05 Bedienungsanleitung Robert Abbey 1841 Bedienungsanleitung Living & Co BST-005 Bedienungsanleitung InnoGIO GIOunicorn Mały ING-200 Bedienungsanleitung Robert Abbey S3380 Bedienungsanleitung Robert Abbey PM993 Bedienungsanleitung Living & Co BST-081 Bedienungsanleitung IKEA MOLNART 106.212.02 Bedienungsanleitung IKEA BACKSTÖRN 305.909.59 Bedienungsanleitung IKEA HAMNFYR 805.929.89 Bedienungsanleitung