Canarm Arden IPL707A01GPH Bedienungsanleitung

Lies die bedienungsanleitung für Canarm Arden IPL707A01GPH (2 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 11 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 6 Bewertungen. Hast du eine Frage zu Canarm Arden IPL707A01GPH oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

INSTALLATION:

5. Connect the ground wires

(bare copper or green) from

your fixture to the ground wire

(bare copper or green) or

ground screw in the electrical

box. Connect the black wire

from the fixture to the black

wire in the electrical box and

connect the white wire from

the fixture to the white wire in

the electrical box.

6. Once wire connections are

completed, carefully tuck wires

and wire nuts into the

electrical box making sure no

bare wire (on the black and

white) is visible at the wire

nuts.

7. Install the light fixture to

the ceiling by aligning the

holes in the fixture with the

studs on the mounting bracket.

Secure fixture in place with star

washers and cap nuts.

8. Install proper bulb type

and wattage (not included).

1. Turn the fixture up-side

down. Remove spinner nut from

socket. Position the shade on

the socket. Tighten the

decorative rings by thumb

screws and nuts . Secure the

shade with spinner nut.

2.Loosen “B”. Adjust stud to

desired length and lock in place

with “B”.

3. Mount the mounting

bracket to electrical box using

electrical box screws (not

included). Make sure the studs

on the mounting bracket are

facing out from the electrical

box.

4.Adjusting the length of

flexible cord. For safety, do

not release the knot inside

canopy.

Canopy

Star

Washer

Cap

Nut

Fixture

PENDANT LIGHT

Tel: (613) 342-5424, Fax: (800) 263-4598

Stud

White

Black

House supply

Ground wire

Fixture

Ground wire

Bare Copper

Ground Wire

IPL707A01

11/17

“B”

Studs

Electrical Box Screws

(not included)

Electrical

Box

Mounting

Bracket

SAFETY PRECAUTIONS:

TOOLS AND MATERIALS REQUIRED:

Phillips

Screwdriver

Wire Cutters

PliersWrench

!

INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS

READ ALL INSTRUCTIONS

IMPORTANT SAFETY

INSTRUCTIONS

SAVE THESE INSTRUCTIONS

QUESTIONS OR CONCERNS CONTACT AT:

1-800-265-1833 (English) / 1-800-567-2513 (French)

Monday through Friday 8:00 AM to 5:00 PM E.S.T.

Wiring supplies

as required by

local electrical

code

1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.

2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE

BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE

HAZARDS INVOLVED.

3. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND

WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL BOX.

4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A

CLEAN, SOFT CLOTH.

NOTE: Product may not look exactly as shown in figures.

Decorative

ring

Spinner

nut

Nut

Thumb

screw

Shade

Bulb

Produktspezifikationen