Canarm LOL387 Bedienungsanleitung
Seiten 2 Beleuchtung
Lies die Bedienungsanleitung für Canarm LOL387 kostenlos online oder lade das PDF herunter. 20 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
INSTALLATION:
LED OUTDOOR
LIGHTING
TOOLS AND MATERIALS REQUIRED:
Phillips
Screwdriver
Wire Cutters
PliersWrench
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE
BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
3. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND
WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL BOX.
4. NOT FOR USE IN LUMINAIRES CONTROLLED BY A DIMMER.
5. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH
A CLEAN, SOFT CLOTH.
NOTE: Product may not look exactly as shown in figures.
LOL386
LOL387
09/18
Wiring supplies
as required by
local electrical
code
QUESTIONS OR CONCERNS CONTACT AT:
1-800-265-1833 (English) / 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
Tel: (613) 342-5424, Fax: (800) 263-4598
4. Position hole in fixture over nipple and secure in
place with cap nut.
SAFETY PRECAUTIONS:
1. Attach nipple to
mounting bracket. Adjust so
it will clear hole in back of
fixture and then lock nipple
in place with hex nut. Attach
mounting bracket to electrical
box with electrical box screws
(not included).
2. Connect the ground wires
(bare copper or green) from your
fixture to the ground wire (bare
copper or green) or ground screw
in the electrical box. Connect the
black wire from the fixture to the
black wire in the electrical box
and connect the white wire from
the fixture to the white wire in the
electrical box.
NOTE: Do not disconnect any
pre-wired connections.
3.
Once connections of wires
are completed, carefully tuck
wires and wire nuts into the
electrical box making sure no bare
wire (on the black and white) is
visible at the wire nuts.
White
Black
House
supply
Ground
wire
Fixture
Ground
wire
Cap Nut
Mounting
Bracket
Electrical
Box
Nipple
Hex nut
Electrical Box Screws
(not included)
5.
Position glass inside guard and place on fixture.
Secure in place with two screws and tighten until
gaskets seal.
LOL386
LOL387
LOL386
LOL387
Glass
Guard
Screw
Weather Resistant
Caulking
(not included)
6.After installation, seal around the side perimeter
between the fixture and the wall or ceiling surface
with weather resistant caulking (not included).
Produktspezifikationen
| Marke: | Canarm |
| Kategorie: | Beleuchtung |
| Modell: | LOL387 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Canarm LOL387 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Beleuchtung Canarm
Canarm LOL392 Bedienungsanleitung Canarm Elm IOL402 Bedienungsanleitung Canarm Tay IOL309 Bedienungsanleitung Canarm Marcella IOL322 Bedienungsanleitung Canarm IOL337 Bedienungsanleitung Canarm Avery IOL587 Bedienungsanleitung Canarm Treehouse IOL314 Bedienungsanleitung Canarm LED LOL386 Bedienungsanleitung
Alle Canarm Beleuchtung Bedienungsanleitungen
Beliebt in Beleuchtung
Canarm IPL318A03AL Bedienungsanleitung Canarm LCL161A04CWGBK Bedienungsanleitung Canarm Novalee IPL1130A01GD Bedienungsanleitung
Bedienungsanleitung Beleuchtung
Neueste Bedienungsanleitungen für Beleuchtung
IKEA MOLNART 406.212.05 Bedienungsanleitung Robert Abbey 1841 Bedienungsanleitung Living & Co BST-005 Bedienungsanleitung InnoGIO GIOunicorn Mały ING-200 Bedienungsanleitung Robert Abbey S3380 Bedienungsanleitung Robert Abbey PM993 Bedienungsanleitung Living & Co BST-081 Bedienungsanleitung IKEA MOLNART 106.212.02 Bedienungsanleitung IKEA BACKSTÖRN 305.909.59 Bedienungsanleitung IKEA HAMNFYR 805.929.89 Bedienungsanleitung