Canarm Treehouse IOL314 Bedienungsanleitung
Canarm
Beleuchtung
Treehouse IOL314
Lies die bedienungsanleitung für Canarm Treehouse IOL314 (1 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 5 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 3 Bewertungen. Hast du eine Frage zu Canarm Treehouse IOL314 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/1
INSTALLATION:
Bulb
Tel: (613) 342-5424, Fax: (800) 263-4598
4. Once connections of wires
are completed, carefully tuck
wires and wire nuts into the
electrical box making sure no
bare wire (on the black and
white) is visible at the wire nuts.
Install the light fixture to the
wall by aligning the hole(s) in
the fixture with the studs on
the mounting bracket. Secure
in place with cap nut(s) and star
washer (s).
5. Install the proper bulb type
and wattage (not included).
6. After Installation, seal
around the top and side
perimeter between the fixture
and the wall surface with
weather resistant caulking. The
bottom should be left
un-caulked to prevent moisture
build-up. Apply a small amount
of weather resistant caulking
around the side perimeter
between the cap nut and
mounting plate.
Weather resistant
caulking
(not included)
IOL314
IOL315
09/16
Cap nut
Cap nut
Star
washer
L
N
L
N
Fixture
Option 1
Option 2
Black (Live)
White
(Neutral)
Green (Ground)
Easy Connect
mounting
bracket
(L)
Black
(Live)
(L)
Black (Live)
(L)
Black (Live)
(N)
White
(Neutral)
(N)
White
(Neutral)
(N)
White
(Neutral)
Green
(Ground)
Green
(Ground)
Green
(Ground)
Jumper Wire
Jumper Wire
Electrical
box screws
1. Attach easy connect
mounting bracket to
electrical box with electrical
box screws
(not included).
2. Option 1: Connect
(push) electrical wires from
electric box (house wiring)
into correct inserts.
Option 2: For multiple black
(live) & white (neutral) wires
joined in the electrical box
(house wiring), attach a
single “black” and “white”
Jumper Wire before
connecting. Strip 7mm
from a 6” Jumper Wires (AWG
12-24) supplied. Then
connect (push) wires into
correct inserts.
3. Connect (push)
electrical wires from fixture
into correct inserts.
L
N
L
N
SAFETY PRECAUTIONS:
EASY CONNECT®
INSTALLATION INSTRUCTIONS
!
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
NOTE: Product may not look exactly as shown in figures.
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. WIRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE.
3. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY
A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH
A CLEAN, SOFT CLOTH.
QUESTIONS OR CONCERNS CONTACT AT:
1-800-265-1833 (English) / 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
Produktspezifikationen
| Marke: | Canarm |
| Kategorie: | Beleuchtung |
| Modell: | Treehouse IOL314 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Canarm Treehouse IOL314 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Beleuchtung Canarm
19 Januar 2026
19 Januar 2026
19 Januar 2026
19 Januar 2026
18 Januar 2026
17 Dezember 2025
16 Dezember 2025
16 Dezember 2025
16 Dezember 2025
16 Dezember 2025
Bedienungsanleitung Beleuchtung
- Angler
- Craftsman
- Brighter
- Blumfeldt
- Monacor
- Scubalamp
- Philips
- Qazqa
- Yorkville
- Harlowe
- Laserworld
- Amaran
- Inventum
- Westinghouse
- Hoffman
Neueste Bedienungsanleitung für -Kategorien-
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026