Canon FDJ-G01 Bedienungsanleitung

Lies die bedienungsanleitung für Canon FDJ-G01 (6 Seiten) kostenlos online; sie gehört zur Kategorie Objektiv. Dieses Handbuch wurde von 21 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 11 Bewertungen. Hast du eine Frage zu Canon FDJ-G01 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

（Unit : mm）

30.5

17.9

36.5

φ80

φ72

26.4

17°

11°

59

98

84

50

7

7

45°

34

45.2

15°

15°

B

A

Display

Focus Characteristics Curve Selector Switch

Torque Adjusting

Knob

AUX1 Switch

AUX2 Switch

Connector to Lens

Rose Joint

Reverse Switch

Index

Mark 1

EXEC Switch

Control Keys

Display Switch

Operation Knob

Index

Mark 2

[

External view

]

1 PRODUCT LIST

Make sure all of the following items are included in the packing box. If you nd any item missing,

please contact your Canon sales representive or dealer.

・Focus Demand

・Clamper<CR-30>

・Demand Cable

・Operation Manual “Before Using The Product”

・Operation Manual “Regulations”

1/6© CANON INC. 2025BT1-D017-B-ENG

Before using the product, make sure to read the "GENERAL SAFETY INFORMATION"

and be sure to use the product correctly.

Thank you for purchasing a focus demand <FDJ-G01>. This focus demand

<FDJ-G01> is an accessory used to perform focus servo operations of a box type

lens. The focus can be operated remotely by using this demand.

Lens Accessory

Focus Demand

FDJ-G01

OPERATION MANUAL

This product comes with the following documents:

• Operation Manual "Before Using The Product" （Included with the product）

• Operation Manual "Regulations" （Included with the product）

• Operation Manual （Web）

2 MOUNTING AND CONNECTING

2-1. Mounting the Focus Demand

1. Loosen the large and small lock knobs of the clamper

supplied with the focus demand, and mount the

clamper to the pan handle of the tripod.

2. After mounting the clamper to the pan handle, tighten

the large and small lock knobs to secure the clamper.

3. Mate the rose joint of the focus demand with the rose

joint of the clamper. Then tighten the mounting knob

of the clamper to rmly secure the focus demand.

2-2. Connecting the Demand Cable

1. Plug the male connector of the demand cable into

the receptacle labeled “TO SERVO CONTROL” at

the rear bottom of the lens, then turn the xing ring of

the connector clockwise to tighten the demand cable

securely.

2. Plug the other end of the cable into the connector of

the focus demand.

3 BASIC OPERATION

3-1. Focusing operation

Turning the operation knob on the focus demand brings the object into focus. The lens is

focused on a farther object by turning the operation knob clockwise (as viewed from the

operation knob). By turning the operation knob counterclockwise, the lens is focused on a

closer object.

3-2. Changing the focus direction

The demand is set at the factory that turning the operation knob clockwise focuses on

a farther object. However it can be reversed by shifting the reverse switch of the focus

demand to other side. Then, turning the operation knob clockwise focuses on a closer

object.

3-3. Adjusting the operation knob torque

Turning the torque adjusting knob on the focus demand clockwise increases the torque

for the operation knob’s rotation. To decrease the torque, turn it counterclockwise.

Lock

Lock

Fastening Knob

Clamper

<CR-30>

Pan Handle

Mounting Knob

TO SERVO CONTROL .

Lock

Fixing Ring

3-4. Selecting the focusing characteristics curve

Focus characteristics curve selector switch can be used to select one of the focus curves

from the following three modes.

Standard mode :

Standard characteristics where the focus lens

group is moved almost linearly, relative to the

operation knob rotation angle.

Far mode :

Focusing resolution for farther objects is

intentionally increased. This enables fine and

easy adjustment work for farther objects near to

innity.

Near mode :

Focusing resolution for closer objects is

intentionally increased. This enables fine and

easy adjustment work for closer objects near to

M.O.D.

4 EXPANDED OPERATION AND FUNCTION

The following functions can be assigned to either AUX1 switch, AUX2 switch or EXEC switch.

Refer to “5 Display operation” for the detailed assignment procedures.

4-1. Return operation

While the switch is pressed, the external video picture sent to the TV camera head can be

seen on its viewnder.

To use this function (RET1/RET2/RET3/RET4

*1 *2

/RET5

*1 *2

/RET6

*1 *2

/RET7

*1 *2

/RET8

*1 *2

)

*3

,

Return function has to be assigned to either AUX1 switch, AUX2 switch

*4

or EXEC switch.

*1 To use the RET4-8 function, the camera, lens, and demand must each support this function. This product supports

the RET4-8 function with the latest rmware.

*2 RET4-8 settings are listed when the setting to activate or deactivate these functions is set to on, which enables

function assignment.

*3 By sending RET1-8 signals to the camera, the camera will execute the functions set for each of RET1-8. For

details, refer to the camera operation manual.

*4 The default setting of AUX2 switch at the shipment from the factory is RET1 function.

4-2. Memory operation

This function is used for the setting when Focus Range Limit, Fine Focus Mode 1, Control

Range Limit or Focus Preset functions are assigned. To use this Memory (Memo) function,

Memo function has to be assigned to either AUX1 switch, AUX2 switch or EXEC switch. (The

default setting of AUX1 switch at the shipment from the factory is Memo function.)

Knob Position

Focus Position

M.O.D.

Infinity

Standard Mode

Near Mode

Far Mode

Produktspezifikationen