Cres Cor EB-96 Bedienungsanleitung


Lies die bedienungsanleitung für Cres Cor EB-96 (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 26 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 13.5 Bewertungen. Hast du eine Frage zu Cres Cor EB-96 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/4
OPERATING and MAINTENANCE INSTRUCTIONS
Models: EB Banquet Warming Cabinets
5925 Heisley Road Mentor, OH 44060-1833
Insulated
Banquet Cabinet
FL-2370
Rev. 1 (10/14) Page 1 of 4
Call Toll-free: 877-CRES COR (273-7267) Fax: 800-822-0393 www.crescor.com
ELECTRICAL SPECIFICATIONS:
EB-64
EB-96
EB-120
EB-150A
EB-150-XX
120 1500 12.5 60 1 5-15P
208 1500 7.3 60 1 6-15P
240 1500 6.3 60 1 6-15-P
Models are designed for AC Service.
Model Nos. may include sufxes: L, U, US, W, ST, Z and S.
HOW TO INSTALL UNIT:
1. Remove all packing material from inside the
cabinet and clean cabinet thoroughly.
2. Install all channels and shelves before the unit is
put into operation.
3. Plug the power cord into the proper wall outlet.
4. For W Humidity Models: Add water to pan in
hot unit.
HOW TO START UNIT:
1. Turn the switch . The yellow light POWER ON
will turn on.
2. Turn the thermostat to no. 10.
3. Preheat (assuming a cold cabinet of 75°F/2C):
To 150°F/65°C takes about 30 mins.
To 175°F/79°C takes about 45 mins.
To 190°F/88°C takes about 1 hour.
4. Put food into the cabinet.
5. Turn the thermostat to the required temperature.
NOTE: No. 8 is about 180°F/82°C
No. 7 is about 160°F/71°C
No. 6 is about 145°F/63°C
Proper food holding temperature is 140°F / 60°C or
higher.
TO TURN OFF UNIT:
Push the POWER switch to OFF.
The light will go out.yellow
Thermometer
Switch
w/Light
Thermostat


Produktspezifikationen

Marke: Cres Cor
Kategorie: Nicht kategorisiert
Modell: EB-96

Brauchst du Hilfe?

Wenn Sie Hilfe mit Cres Cor EB-96 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten