Ctek MXS 10EC Bedienungsanleitung

Ctek Ladegerät MXS 10EC

Lies die bedienungsanleitung für Ctek MXS 10EC (8 Seiten) kostenlos online; sie gehört zur Kategorie Ladegerät. Dieses Handbuch wurde von 20 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 10.5 Bewertungen. Hast du eine Frage zu Ctek MXS 10EC oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/8

EN • 3

MANUAL

SAFETY

•Thechargerisdesignedforchargingonlybat-

teriesaccordingtothetechnicalspecication.

Donotusethechargerforanyotherpurpose.

Alwaysfollowbatterymanufacturers'userand

safetyrecommendations.

•Nevertrytochargenon-rechargeablebatteries.

•Neverplacethechargerontopofthebattery

orcoverthechargerwhencharging.

•Neverchargeafrozenordamagedbattery.

•NeverchargeaLi-batterywithtemperature

below0°C(32°F)ifnotspeciedbythebattery

manufacturer.

•Neveruseachargerwithdamagedcables.

Ensurethatthecableshavenotbeendamaged

byhotsurfaces,sharpedgesorinanyother

way.

•Neverplaceafan-cooledchargersothatdust,

dirtorsimilarcanbesuckedintothefan.

•Adamagedcablemustbereplacedbya

CTEKrepresentativeusinganoriginalpart

suppliedbyCTEK.Adetachablecablecanbe

replacedbytheuserusinganoriginalpartsup-

pliedbyCTEK.

•Connectiontothemainssupplymustbein

accordancewiththenationalregulationsfor

electricalinstallations.

•Chargerswithgroundedmainsplugmustonly

beconnectedtoagroundedsocketoutlet.

•Duringcharging,Lead-Acidbatteriescould

emitexplosivegases.Preventsparkscloseto

thebattery.Provideforgoodventilation.

•ChargerswithIP-classlowerthanIPx4are

designedforindooruse.Seetechnicalspeci-

cation.Donotexposetorainorsnow.

•Connectthechargertothebattery´spositive

poleandthentothenegativepole.Forbatter-

iesmountedinsideavehicle,connectthenega-

CONGRATULATIONS

tothepurchaseofyournewprofessionalswitchmodebatterycharger.Thischargeris

includedinaseriesofprofessionalchargersfromCTEKSWEDENABandrepresentsthe

latesttechnologyinbatterycharging.

4 • EN

tiveconnectiontothevehiclechassisremote

fromthefuelpipe.Thenconnectthechargerto

mainssupply.

•Disconnectthechargerfromthemainssupply.

Nextremovethenegativeconnection(vehicle

chassis)andthenthepositiveconnection.

•Don’tleaveanybatteryunattendedfora

longerperiodoftimeduringcharging.Ifany

erroroccursdisconnectthechargermanually.

•(IEC 7.12 ed.5)Thisapplianceisnot

intendedforusebypersons(includingchildren)

withreducedphysical,sensoryormentalcapa-

bilities,orlackofexperienceandknowledge,

unlesstheyhavebeengivensupervisionor

instructionconcerninguseoftheapplianceby

apersonresponsiblefortheirsafety.Children

shouldbesupervisedtoensurethattheydonot

playwiththeappliance.

(EN 7.12)Thisappliancecanbeusedby

childrenagedfrom8yearsandaboveand

personswithreducedphysical,sensoryor

mentalcapabilities,orlackofexperienceand

knowledgeiftheyhavebeengivensupervi-

sionorinstructionconcerninguseoftheappli-

anceinasafewayandunderstandthehazards

involved.Childrenshallnotplaywiththeappli-

ance.Cleaningandusermaintenanceshallnot

bemadebychildrenwithoutsupervision.

EN • 5

NORMAL

BAT TERY

PROGRAM

ERROR LAMP

AGM

BAT TERY

PROGRAM

fULLY ChARGEdREAdY TO USE

RECONd

PROGRAM

SUPPLY

PROGRAM

POWER

LAMP

hOW TO ChARGE

1. Connectthechargertothebattery.

2. Connectthechargertothewallsocket.Thepowerlampwillindicatethatthemains

cableisconnectedtothewallsocket.Theerrorlampwillindicateifthebatteryclamps

areincorrectlyconnected.Thereversepolarityprotectionwillensurethatthebattery

orchargerwillnotbedamaged.

3. PresstheMODE-buttontoselectchargingprogram.

4. Followthe8-stepdisplaythroughthechargingprocess.

ThebatteryisreadytostarttheenginewhenSTEP4islit.

ThebatteryisfullychargedwhenSTEP7islit.

5. Stopchargingatanytimebydisconnectingthemainscablefromthewallsocket.

MOdE-

BUT TON

TEMPERATURE

SENSO R

INdICATOR

Produktspezifikationen

Marke:	Ctek
Kategorie:	Ladegerät
Modell:	MXS 10EC
Breite:	93 mm
Tiefe:	197 mm
Gewicht:	800 g
Produktfarbe:	Schwarz, Silber
Internationale Schutzart (IP-Code):	IP64
Höhe:	49 mm
AC Eingangsspannung:	220 - 240 V
AC Eingangsfrequenz:	50 - 60 Hz
Eingebautes Display:	Nein
LED-Anzeigen:	Charging, Y
Ausgangsstrom:	10 A
Batteriekapazität (min.):	20 Ah
Batteriekapazität (max.):	300 Ah
Ladespannung:	12 V