Ctek XC 0.8 Bedienungsanleitung

Ctek Ladegerät XC 0.8

Lies die bedienungsanleitung für Ctek XC 0.8 (5 Seiten) kostenlos online; sie gehört zur Kategorie Ladegerät. Dieses Handbuch wurde von 18 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 9.5 Bewertungen. Hast du eine Frage zu Ctek XC 0.8 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/5

EN • 3

CHARGING

1. Connect the charger to the battery.

2. Connect the charger to the wall socket. The error lamp will indicate if the battery

clamps are incorrectly connected. The reverse polarity protection will ensure that the

battery or charger will not be damaged.

3.Follow the indication lamps through the charging process.

The battery is fully charged when is lit.

4. Stop charging at any time by disconnecting the mains cable from the wall socket.

CONGRATULATIONS

to the purchase of your new professional switch mode battery charger. This charger is

included in a series of professional chargers from CTEK SWEDEN AB and represents the

latest technology in battery charging.

CTEK COMFORT CONNECT – eyelet M6

6V/0.8A

XC 0.8

CTEK COMFORT CONNECT

MAINS CABLE

DESULPHATION

BULK

ABSORPTION

FULLY CHARGED

PULSE, MAINTENANCE CHARGING

CTEK COMFORT CONNECT – clamp

CHARGE CABLE

SUPPLY PLUG*

*Supply plugs may differ to suit your wall socket.

MANUAL

ERROR LAMP

4 • EN

BATTERY SIZE (Ah) TIME TO 80% CHARGED

2Ah 2h

8Ah 8h

20Ah 20h

60Ah 60h

READY TO USE

The table shows the estimated time for empty battery to 80% charge

ERROR LAMP

If the error lamp is lit, check the following:

— Is the chargers positive lead connected to the

batterys positive pole?

— Connect the charger according to page 6.

TECHNICAL SPECIFICATIONS

Charger model XC 0.8

Model number 1054

Rated Voltage AC 220–240VAC, 50–60Hz

Charging voltage 7.2V

Start voltage 3.7V

Charging current 0.8A max

Current, mains 0.2A rms (at full charging current)

Back current drain* <1Ah/month

Ripple** <4%

Ambient

temperature

-20°C to +50°C, output power is reduced

automatically at high temperatures

Charger type 4-step, fully automatic charging cycle

Battery types All types of 6V lead-acid batteries

(WET, MF, Ca/Ca, AGM and GEL)

Battery capacity 1.2–100Ah

Dimensions 142x51x36mm(LxWxH)

Insulation class IP65

Weight 0.3kg

*) Back current drain is the current that drains the battery if the charger is not connected

to the mains. CTEK chargers has a very low back current.

**) The quality of the charging voltage and charging current is very important. A high

current ripple heats up the battery which has an aging eﬀect on the positive electrode.

High voltage ripple could harm other equipment that is connected to the battery. CTEK

battery chargers produce very clean voltage and current with low ripple.

FULLY CHARGED

EN • 5

VOLTAGE (V)CURRENT (A)

PULSE

DESULPHATION BULK ABSORPTION

Increasing voltage

to 7.2V

0.8A

7.2V 7.2V

Declining current

6.4V‒7.2V

0.8‒0.4A

2 3 4

charging PrOgraM

XC 0.8 is equipped with a multi purpose charging program. XC 0.8 charges all batteries 1.2–100Ah

in the temperature range of -20˚ to +50˚C (-4˚F to +122˚F).

CTEK SWEDEN AB, issues this limited warranty to

the original purchaser of this product. This limited

warranty is not transferable. The warranty applies

to manufacturing faults and material defects for

5 years from the date of purchase. The customer

must return the product together with the receipt of

purchase to the point of purchase. This warranty

is void if the battery charger has been opened,

handled carelessly or repaired by anyone other

than CTEK SWEDEN AB or its authorised repre-

sentatives. CTEK SWEDEN AB makes no war-

ranty other than this limited warranty and is not

liable for any costs other than those mentioned

above, i.e. no consequential damages. Moreover,

CTEK SWEDEN AB is not obligated to any war-

ranty other than this warranty.

LiMiTED WarranTY

STEP 1 DESULPhaTiOn

Detects sulphated batteries. Pulsing cur-

rent and voltage, removes sulphate from

the lead plates of the battery restoring

the battery capacity.

STEP 2 BULK

Charging with maximum current until

approximately 80% battery capacity.

STEP 3 aBSOrPTiOn

Charging with declining current to maxi-

mize up to 100% battery capacity.

STEP 4 PULSE

Maintaining the battery at 95–100%

capacity. The charger monitors the

battery voltage and gives a pulse when

necessary to keep the battery fully

charged.

Produktspezifikationen

Marke:	Ctek
Kategorie:	Ladegerät
Modell:	XC 0.8
Breite:	51 mm
Tiefe:	142 mm
Gewicht:	300 g
Produktfarbe:	Bordeaux, Silver
Höhe:	36 mm
Betriebstemperatur:	-20 - 50 °C
Akku-/Batteriespannung:	6 V
Kabelfarbe:	Schwarz
Eingangsspannung:	220-240 V
Eingangsfrequenz:	50/60 Hz
Ladestrom:	0.8