Elektrobock BT010 Bedienungsanleitung

Lies die bedienungsanleitung für Elektrobock BT010 (2 Seiten) kostenlos online; sie gehört zur Kategorie Thermostat. Dieses Handbuch wurde von 47 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 7 Bewertungen. Hast du eine Frage zu Elektrobock BT010 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

MADE IN CZECH REPUBLIC

The biggest advantage of BPT010 is the two way communication with the receiver and very simple

control of desired temprature by turn of roller on the transmittor. Installation without cutting the wall

and pulling wires are other advantages that convince you to modernize the regulation of your heating

system.Receiver is equipped with the autodidactic system and the E-EPROM memory that will keep

the stored code even during voltage failure.

The BPT010 can control only one receiver.

TECHNICAL PARAMETERS

Power supply2x1,5 V alkal. batteries

Communication typetwo-way

Frequency433,92 MHz

Vf-Sensitivity <10mW

Hysteresis0,4 °C

Temp. range11 °C to 29 °C (frost protection 3°C)

Protection IP20

Working temp. 0 to 40°C

Accuracy± 1°C

DECLARATION OF CONFORMITY

We, ELEKTROBOCK CZ s.r.o., herewith declare that our product BPT010 is in conformity with

the basic requirements and other respective provisions of the directive 1999/5/ES. Issued:

1.04.2012

MADE IN CZECH REPUBLIC

Pb

LEAD FREE

Im Einklang mit RoHS

ELEKTROBOCK CZ s.r.o.

Blanenská 1763

Kuřim 664 34

Tel.: +420 541 230 216

www.elbock.cz

CERTIFICATE OF GUARANTEE

(guarantee period for the product amounts to 2 years)

product No.:

examined by::

date of sale::

stamp of shop:

Send the product for guarantee and after guarantee service to manufacturer’s address.

IMPORTANT INFORMATIONS

IF CAUSE and SOLUTION

On the transmitter flashes the LED

3 x in 8 s

Necessity of battery exchange.

Remowe the batteries for new ones.

On the transmitter flashes the LED

2 x in 8 s

Transmission error signal betwen transmitter and receiver

Check if the receiver is right connected to power supply. On receiver

press for about 3s the button for testing the connection - the relays

must several times switch on and off.

Produktspezifikationen