EXSYS EX-60115 Bedienungsanleitung


Lies die bedienungsanleitung für EXSYS EX-60115 (2 Seiten) kostenlos online; sie gehört zur Kategorie Netzwerkkarte / Adapter. Dieses Handbuch wurde von 30 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 15.5 Bewertungen. Hast du eine Frage zu EXSYS EX-60115 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
87654321
6 5 1
BESCHREIBUNG & TECHNISCHE DATEN
AUFBAU
Anleitun
Die EX 60115 ist eine 2.5 Gigabit Ethernet Karte mit vier RJ45 Ports für den PCIe Bus. Sie -
unterstützt Half und Full Duplex sowie Auto Negotiation zur automatischen Anpassung an die - - -
Geschwindigkeit im Netzwerk (10/100/1000/2500 Mbit/s). Dank PCI Express x4 mit vier Lanes -
steht genügend Bandbreite zur Verfügung, um an allen vier Ethernet Ports gleichzeitig die volle -
Kompatibilität: PCI Express p1-x4 bis x16 -
Betriebssysteme: Windows 8.x/10/11 (32 bit/64 bit), Linux - -
Anschlüsse: 4x RJ45 2.5 Gigabit Ethernet Anschluss
Lieferumfang: 60115, Low Profile Bügel, Anleitung EX-
ANSCHLÜSSE & LED`S
RJ45 Anschluss:
Status LEDs:
RJ45 Anschluss
Pin Signal Pin Signal Pin Signal
1 BI_DA+ 4 BI_DC+ 7 BI_DD+
2 BI_DA 5 BI_DC 8 BI_DD - - -
3 BI_DB+ 6 BI_DB -
DRIVER INSTALLATION
Windows / Linux / Unix
Once the hardware installation is complete, the operating system will automatically detect and
install the card. If the drivers are not installed automatically, they can be downloaded from the
EXSYS website (www.exsys.de / www.exsys.ch). Enter the article number in the search field
and select the appropriate article. Under 'Downloads' you will find the current driver as a ZIP
file. Once you have extracted the driver folder to your computer, run 'Autorun.exe'. Follow the
installation instructions to complete the installation.
Important! Reboot your PC/Server after installation.
CHECK INSTALLED DRIVER
Open the >Device manager<. Now you should see at Network adapters the following new
entries:
If you see these or a similar informations the device is installed correctly.
HARDWARE INSTALLATION
4x RJ45 Anschluss
Status LEDs pro Anschluss
LED Name Farbe LED Funktion
Speed
Gelb
Grün
Gelb: 2.5 Gbps
Grün: 1000 Mbps
Aus: 10/100 Mbps
LINK (ACT) Grün
Steady on: V erbunden
Blinking: Datenübertragung
Vers. 1.0 / 06.03.24
E 6011
Switzerland:
EXSYS Vertriebs GmbH
Dübendorfstrasse 17
8602 Wangen
www.exsys.ch
Germany:
EXSYS Vertriebs GmbH
Industriestrasse 8
61449 Steinbach
www.exsys.de
Italy:
EXSYS Italia Srl
Via Belvedere, 45/B
I 22100 Como -
www.exsys.it
Please note the following installation instructions. As there are major differences between PCs, we
can only provide you with general instructions for installing the EX-60115. If in doubt, please consult
the manual for your computer system.
1. Switch off your computer and all connected peripheral devices and unplug all devices from the
mains.
2. Loosen the housing screws on the back of your computer and carefully pull off the housing.
3. Now locate a free PCI Express slot (x4 or larger) and carefully insert the card into the selected
PCI Express slot. Make sure that the card is seated correctly and that there is no short circuit.
4. Then secure the card to the housing with a screw.
5. Now close the computer housing with the previously removed screws.


Produktspezifikationen

Marke: EXSYS
Kategorie: Netzwerkkarte / Adapter
Modell: EX-60115

Brauchst du Hilfe?

Wenn Sie Hilfe mit EXSYS EX-60115 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten