Festo EAHT-E9-FB-3D-30 Bedienungsanleitung
Festo
Nicht kategorisiert
EAHT-E9-FB-3D-30
Lies die bedienungsanleitung für Festo EAHT-E9-FB-3D-30 (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 2.5 Bewertungen. Hast du eine Frage zu Festo EAHT-E9-FB-3D-30 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/1
Assembly instructions (Original instructions)
8079181
2017-09a
[8079183]
†‡
Mounting kit
EAHT-E9-FB-3D-30
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
1. Further applicable documents
All available documents for the product www.festo.com/pk
Observe further applicable documents:
Description of the planar surface gantry 4 and actuator 5
Assembly instructions of profile mounting attachment 6 and
connection kit 7
2. Safety
Switch off power supply before mounting work.
Comply with tightening torques ( Table).
3. Intended use
Mounting of a Z-axis 5 to the Y-axis of the planar surface gantry 4.
4. Additional information
Centring sleeve (B) www.festo.de/catalogue
5. Scope of delivery
2227
6d_1 1 Mounting kit
2 Screw
3 Cylindrical
dowel pin
(1x)
(2x)
(2x)
6. Not in scope of delivery
2227
6d_2 4 Planar surface
gantry
EXCM-30
(1x)
2227
6d_3 5 Z-axis1)
DGSL-8/-10/-12
EGSC-25/-32
2)
EGSK-20/-26
EGSL-35
(1x)
2227
6d_4 6 Profile mounting
attachment
EAHF-L2-25-P
7 Connection kit
EAHT-AE-3D
(1x)
(1x)
7. Mounting
7a. Interface to planar surface gantry 4
4
4
44
22276d_5
Place the mounting kit 1
with cylindrical dowel
pins 3 at slide unit (A)
of the Y-axis of the planar
surface gantry 4.
Tighten the screws 2.
7b. Interfaces of Z axis 5
5
5
55
Mounting components and tightening torques ( Table).
For DGSL-8/-10
22276d_6
Position centring sleeves (B).
Position of Z-axis 5 1 on the mounting kit .
Tighten the screws (C).
For DGSL-12
22276d_7
Position centring sleeves (B).
Position of Z-axis 5 1 on the mounting kit .
Tighten the screws (C).
1 2
1) Mounting components are not included in the scope of delivery of Z-axis 5.
2) In case of EGCS-25/-32 with a stroke of 25, mounting is not possible.
For EGSC-25
22276d_13
Place the profile mounting attachments 6 along the Z-axis 5 ( Further
applicable documents).
Position of Z-axis 5 1 on the mounting kit .
Mount the profile mounting attachments 6 to the mounting kit 1 with
the screws (C).
For EGSC-32
22276d_12
Place the profile mounting attachments 6 along the Z-axis 5 ( Further
applicable documents).
Position of Z-axis 5 1 on the mounting kit .
Mount the profile mounting attachments 6 to the mounting kit 1 with
the screws (C).
For EGSK-20
22276d_9
Position of Z-axis 5 1 on the mounting kit .
Tighten the screws (C).
3)
3) Tolerances for tightening torques MA without specification of tolerance
MA = 1.2 Nm: ± 10 %
MA , 1.2 Nm: ± 20 %
For EGSK-26
22276d_10
Position of Z-axis 5 1 on the mounting kit .
Tighten the screws (C).
For EGSL-35
22276d_8
Position centring sleeves (B).
Position of Z-axis 5 1 on the mounting kit .
Tighten the screws (C).
7c. Interface to connection kit 7
7
7
77
2227
6d_1
1
Observe assembly
instructions for connection
kit 7 ( Further applicable
documents).
8. Screw sizes and tightening torques M
A
3)
EAHT-E9- 2
2
2
22 [Nm]
FB-3D-30 M4x10 2.5
Not in scope of delivery:
Z-axis 5
5
5
55 Centring sleeve (B) (C) Screw ISO 4762 [Nm]
DGSL-8/-10 ZBH-7 (2x) M4x10-8.8 (2x) 2.0
DGSL-12 ZBH-7 (2x) M5x12-8.8 (2x) 3.0
EGSC-25/-32 – – M4x8-8.8 (4x) 2.0
EGSK-20 – – M3x6-8.8 (4x) 1.2
EGSK-26 – – M4x6-8.8 (4x) 2.5
EGSL-35 ZBH-7 (2x) M4x12-8.8 (4x) 2.5
9. Prior to commissioning
Note
Collision!
The mounting kit reduces the available Y-stroke of the planar surface
gantry 4 by 16 mm.
Check Z-axis 5 for collision.
Set the end stops of the Y-axis at the planar surface gantry 4 ( Further
applicable documents).
4
1
3
2
4
3
1
A
7
1
7
1
5
B
C
1
5
B
C
1
5
B
C
2
6
5
1
5
C
6
1
5
C
6
1
5
C
1
5
C
Produktspezifikationen
| Marke: | Festo |
| Kategorie: | Nicht kategorisiert |
| Modell: | EAHT-E9-FB-3D-30 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Festo EAHT-E9-FB-3D-30 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Festo
12 Juni 2025
12 Juni 2025
12 Juni 2025
12 Juni 2025
12 Juni 2025
12 Juni 2025
12 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
Bedienungsanleitung Nicht kategorisiert
- Beretta
- EarthQuaker Devices
- Leisure
- VAIS Technology
- Dasqua
- Portkeys
- Contour Design
- Gra-Vue
- AIC
- JAR Systems
- Applico
- Furuno
- ATN
- API Audio
- Moldex
Neueste Bedienungsanleitung für -Kategorien-
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025