J. Rockett Audio Designs Archer Bedienungsanleitung

Lies die bedienungsanleitung für J. Rockett Audio Designs Archer (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 51 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 26 Bewertungen. Hast du eine Frage zu J. Rockett Audio Designs Archer oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

The Archer is a versatile overdrive/boost with amazing headroom that is designed to help you cut through the

mix. Please experiment with settings and be careful with the output….this dude is loud!

Controls

!: Output The volume control is very powerful and drives fairly hard relatively early. This allows

you to hit the front end of an amp or pedal to get very aggressive or crystal clear.

!: Treble The Treble control is a very effective EQ that goes from dark to a very “chimey”, bright

’tone. Its great to create that midrange clarity.

!: Gain The gain also acts as a mixer control between the clean boost and the gain. Turn the

gain all the way down and your outpt becomes the volume for all clean boost. u

Start blending in the gain control and it will simultaneously reduce clean volume & introduce

gain…… ..somewhere in the middle is the sweet spot or mix of the two.experiment!!

NOTE: Th-) ere is no goop to contend with.......;

Power Supply

All J. Rockett Audio Designs pedals operate off of the standard BOSS type 9 volt adapter or a single 9 volt

battery. The power input is a 5.5 mm x 2.1 mm jack with the positive voltage on the outer sleeve. Using an

external power supply will automatically disconnect the battery. Disconnect the input jack to preserve battery

life when not in use or when not used with an appropriate, external power supply.

J. Rockett Audio Designs

2.1mm x 5.5 mm tip/negative plug

Produktspezifikationen