J. Rockett Audio Designs Boing Bedienungsanleitung

Lies die bedienungsanleitung für J. Rockett Audio Designs Boing (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 27 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 2 Bewertungen. Hast du eine Frage zu J. Rockett Audio Designs Boing oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

J. Rockett

J. Rockett

J. Rockett

J. RockettJ. Rockett Audio Des

Audio Des

Audio Des

Audio Des Audio Designs

igns

igns

ignsigns

Controls

•Control Knob:Increases or decreases the amount of reverb

Settings

When we developed the BOING reverb we had the live club in mind. The BOING is part of

our new Tour Series line of pedals which are created around simplicity in design and ease

of use. We wanted to recreate a reverb of the past which was specifically designed to cut

through the mix and give your tone some atmosphere. The BOING is a simple, one knob

recreation of the classic Deluxe Reverb and, like many of the classic amps, it is just a single

knob for either more or less reverb.

We made the knob extra large so it can be easily manipulated by one’s foot. There is a ton

of headroom and the reverb can be made to be extremely subtle for use in front of

overdriven amps without getting nasty. When coupled with a delay, like our Alien Echo, you

can achieve some pretty spectacular, spacey, beautiful sounds.

All J. Rockett Audio Designs pedals operate off of the standard BOSS type 9 volt adapter or

a single 9 volt battery. The power input is a 5.5 mm x 2.1 mm jack with the positive voltage

on the outer sleeve. Using an external power supply will automatically disconnect the

battery. Disconnect the input jack to preserve battery life when not in use or when not used

with an appropriate, external power supply.

2.1mm x 5.5 mm tip/negative plug

Produktspezifikationen