Kramer TP-590R Bedienungsanleitung

Kramer Audio-/Video-Extender TP-590R

Lies die bedienungsanleitung für Kramer TP-590R (4 Seiten) kostenlos online; sie gehört zur Kategorie Audio-/Video-Extender. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 2 Bewertungen. Hast du eine Frage zu Kramer TP-590R oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/4

TP-590T, TP-590R Quick Start

P/N:

2900- 301424 QS

Rev:

Scan for full manual

TP-590T and TP-590R Quick Start Guide

This guide helps you install and use your TP-590T and TP-590R for the first time.

Go to www.kramerav.com/downloads/TP-590T and/or www.kramerav.com/downloads/TP-590R to

download the latest user manual and check if firmware upgrades are available.

Step 1: Check what’s in the box

TP-590T 4K HDMI/USB Transmitter OR

TP-590R 4K HDMI/USB Receiver

1 Bracket set

1 Power cord

4 Rubber feet

1 Quick start guide

Step 2: Get to know your TP-590T and TP-590R

TP-590T

Feature

Function

HOST USB 2.0 Connector

Connect to the USB host, (for example, a laptop) to communicate with the USB

peripheral devices (for example, a smart board) connected to USB device ports on

either the transmitter or the receiver.

ACTIVE HOST LED

Lights orange when the device is enabled as an active USB host (see Step 4:

Connect inputs and outputs).

IN LED

Lights blue when an active HDMI input signal is detected on HDMI IN.

OUT LED

Lights blue when an output device is connected to the receiver.

LINK LED

Lights green when the HDBT active link connection is established.

ON LED

Lights green when the device receives power.

HDBT OUT RJ-45 Connector

Connect to the HDBT IN RJ-45 connector on the receiver.

HDMI IN Connector

Connect to the HDMI source.

USB 2.0 Charging Connectors (3)

Connect to the USB local peripheral devices (for example, a mic, a keyboard, a

mouse and so on).

RS-232 3-pin Terminal Block

Connect to a controller device (for example, RC-306) to control a remote device via

serial connection (for example, the PTZ USB camera that is connected to the

receiver).

IR 3.5mm Mini Jack Connector

Connect to an external IR emitter to control a local IR-controlled device from the

receiver side (for example, TP-590R).

Connect to an IR sensor to control a remote IR-controlled device connected to the

receiver side (for example, TP-590R).

SETUP 4-way DIP-switch

Sets the device behavior (see Step 4: Connect inputs and outputs).

5V DC Power Connector

Connect to the power supply.

TP-590R

Feature

Function

ACTIVE HOST LED

Lights orange when the device is enabled as an active USB host (see Step 4:

Connect inputs and outputs).

IN LED

Lights blue when an active HDMI input signal device is detected on HDBT IN.

OUT LED

Lights blue when an output device is connected to the HDMI OUT.

LINK LED

Lights green when the HDBT active link connection is established.

ON LED

Lights green when the device receives power.

HDBT IN RJ-45 Connector

Connect to the HDBT OUT RJ-45 connector on the HDBT transmitter.

HDMI OUT Connector

Connect to the HDMI acceptor.

HOST USB 2.0 Connector

Connect to the USB host (for example, a room PC) to communicate with the USB

peripheral devices (for example, a room camera) connected to USB device ports on

either the transmitter or the receiver.

USB 2.0 Charging Connectors (3)

Connect to the USB local peripheral devices (for example, USB camera, a

soundbar, speakers and so on).

RS-232 3-pin Terminal Block

Connect to a serial device to be controlled.

IR 3.5mm Mini Jack Connector

Connect to an external IR emitter to control a local IR-controlled device from the

transmitter side (for example, TP-590T).

Connect to an IR sensor to control a remote IR-controlled device connected to the

transmitter side (for example, TP-590T).

SETUP 4-way DIP-switch

Sets the device behavior (see Step 4: Connect inputs and outputs).

5V DC Power Connector

Connect to the power supply.

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Step 3: Mount TP-590T and TP-590R

Install TP-590T and TP-590R using one of the following methods:

• Attach the rubber feet and place the unit on a flat surface.

• Fasten a bracket (included) on each side of the unit and attach it to a flat surface

(see www.kramerav.com/downloads/TP-590T and/or www.kramerav.com/downloads/TP-590R).

• Mount the unit in a rack using the recommended rack adapter

(see www.kramerav.com/product/TP-590T and/or

www.kramerav.com/product/TP-590R).

• Ensure that the environment (e.g., maximum ambient temperature &

air flow) is compatible for the device.

• Avoid uneven mechanical loading.

• Appropriate consideration of equipment nameplate ratings should be

used for avoiding overloading of the circuits.

• Reliable earthing of rack-mounted equipment should be maintained.

• Maximum mounting height for the device is 2 meters.

Produktspezifikationen

Marke:	Kramer
Kategorie:	Audio-/Video-Extender
Modell:	TP-590R
AC-Netzadapter:	Ja
Produktfarbe:	Schwarz
Übertragungstechnik:	Kabelgebunden
Energiequelle:	Gleichstrom
Material:	Aluminium
Gleichstrom-Anschluss (DC):	Ja
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	10 - 90 %
Verpackungsbreite:	345 mm
Verpackungstiefe:	165 mm
Verpackungshöhe:	52 mm
Paketgewicht:	1000 g
Zertifizierung:	WEEE, CE, RoHs
Typ:	AV-Receiver
Menge pro Packung:	1 Stück(e)
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-40 - 70 °C
Audio-System:	Stereo
HDCP:	Ja
Unterstützte Video-Modi:	1080p, 2160p
USB-Stecker:	USB Type-A, USB Type-B
Anzahl der USB-Anschlüsse:	4
Maximale Bildwiederholrate:	60 Hz
Serielle Schnittstelle:	RS-232
Maximale Auflösung:	4096 x 2160 Pixel
Nachhaltigkeitszertifikate:	RoHS
Anzahl der HDMI-Ausgänge:	1
Maximal mögliche Übertragungsstrecke:	70 m
Bandbreite:	10.2 Gbit/s
Fernbedienung (IR) output:	1
Empfängergewicht:	500 g
Teilnehmerausgang:	1
RJ-45-Eingangsanschlüsse:	1
Transmitter-Abmessungen (BxTxH):	190.5 x 59.6 x 27.4 mm
HDBaseT zertifiziert:	Ja
Baudrate:	115.2 Kbit/s
Betriebsspannung (Empfänger):	5 V
Stromverbrauch (Empfänger) (max.):	3.6 mA
Ethernet/LAN:	Ja