Kuzco Alberni VL61620 Bedienungsanleitung

Lies die bedienungsanleitung für Kuzco Alberni VL61620 (1 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.1 Sterne aus 3 Bewertungen. Hast du eine Frage zu Kuzco Alberni VL61620 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

INSTALLATION SHEET

VL61620

LED Vanity Lamp

START FROM HERE

Please Note:

• This Kuzco LED fixtures come with pre-wired LED module(s)

• Unless instructed, Do Not touch any part of the LED module(s) as any unnecessary

contact with the module could cause permanent damage

• Use ELV (Electronic Low Voltage) type of dimmer for dimming application

19054 28th Avenue Surrey, BC Canada V3Z 6M3

T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196

W: kuzcolighting.com

1a.1b.1c.1e.1h2f.3a.

1. Remove fixture from its original package

2. Separate mounting plate from fixture body (1c)(3a)

by removing canopy screws (2f)

3. Attach mounting plate to electrical junction box (1c)(1a)

using screws provided in hardware package(1e)

4. Secure mounting plate to mounting surface with (1c)

additional screws (1h)

5. Make proper electrical connections (black to hot “L”,

white to neutral “N”, ground to “GND”) with wire nuts (1b)

provided in hardware package

6. Align mounting plate to holes on fixture body (1c)(3a),

and then attach using canopy screws (2f)

20190617

• Make sure is POWERCOMPLETELY OFF at the fuse box

• Have your fixture installed by a qualified licensed electrician

• Prepare everything in a clear area

• Wear gloves at all time during this installation

• Read instructions carefully before you start assembly

• Keep this installation sheet for future reference

Technical Support: 1-855-855-8926

Produktspezifikationen