Kuzco Cumulus PD80340 Bedienungsanleitung

Lies die bedienungsanleitung für Kuzco Cumulus PD80340 (2 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 8 Bewertungen. Hast du eine Frage zu Kuzco Cumulus PD80340 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

19054 28th Avenue Surrey, BC Canada V3Z 6M3

T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196

W: kuzcolighting.com

INSTALLATION SHEET

PD80340

Ceiling LED Pendant

1a.

1f.

1g.

1b.

1c.

1e.

2g.

2b.

2a.

START FROM HERE

• Make sure POWER is COMPLETELY OFF at the fuse box

• Have your fixture installed by a qualified licensed electrician

• Prepare everything in a clear area

• Wear gloves at all time during this installation

• Read instructions carefully before you start assembly

• Keep this installation sheet for future reference

Technical Support: 1-855-855-8926

Please Note:

• This Kuzco LED fixture comes with pre-wired LED module(s)

• Unless instructed, Do Not touch any part of the LED module(s) as any unnecessary

contact with the module could cause permanent damage

• Use ELV (Electronic Low Voltage) or TRIAC type of dimmer for dimming application

• 120V input

Page 1 of 2

1. Remove fixture from its original package

2.Separate mounting plate (1c) from canopy (2a) by

removing canopy screws (2b)

3.Attach mounting plate (1c) to electrical junction box (1a)

using junction box screws provided (1e) in hardware

package

4. Secure mounting plate (1c) to mounting surface with

anchors (1f) and screws (1g)

5.To change fixture height, push and hold wire gripper

(2g), slide wire to desired length and then release wire

gripper (2g) to secure

6.Make proper electrical connections (black to hot “L”,

white to neutral “N”, ground to “GND”) with wire nuts

(1b) provided in hardware package

7.Attach canopy (2a) to mounting plate (1c) with canopy

screws (2b)

8.Fine tone wire length if necessary, by push and hold

wire gripper (2g) and then adjust wire to desired length

20220322

Produktspezifikationen