Kuzco Cedar VL52512 Bedienungsanleitung

Lies die bedienungsanleitung für Kuzco Cedar VL52512 (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 9 Bewertungen. Hast du eine Frage zu Kuzco Cedar VL52512 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

INSTALLATION SHEET

VL52512

LED Vanity Light

START FROM HERE

19054 28th Avenue Surrey, BC Canada V3Z 6M3

T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196

W: kuzcolighting.com

• Make sure is POWERCOMPLETELY OFF at the fuse box

• Have your fixture installed by a qualified licensed electrician

• Prepare everything in a clear area

• Wear gloves at all time during this installation

• Read instructions carefully before you start assembly

• Keep this installation sheet for future reference

Technical Support: 1-855-855-8926

Please Note:

• This Kuzco LED fixture comes with pre-wired LED module(s)

• Unless instructed, Do Not touch any part of the LED module(s) as any unnecessary

contact with the module could cause permanent damage

• Use ELV (Electronic Low Voltage) or TRIAC type of dimmer for dimming application

• 120V input

20230602

Remove fixture from its original package

Separate mounting plate from canopy by (1c)(2a)

removing canopy screws (2b)

Attach mounting plate to electrical junction (1c)

box (1a) using junction box screws provided (1e) in

hardware package

Make proper electrical connections ( to blackhot “L”,

whiteground“GND”) to “N”, neutral to with wire nuts

(1b) provided in hardware package

Attach canopy to mounting plate with canopy (2a)(1c)

screws (2b)

Attach shade to fixture by threading clockwise(3b) (3a)

1. 4.

5.

6.

2.

3.

1a.1b.1c.1e.2a.

3b.

3a.

2b.

LED DRIVER

Note: Please allow room inside

the outlet box for the LED Driver

Produktspezifikationen