OSD Audio NERO FS800 Bedienungsanleitung

OSD Audio Subwoofer NERO FS800

Lies die bedienungsanleitung für OSD Audio NERO FS800 (2 Seiten) kostenlos online; sie gehört zur Kategorie Subwoofer. Dieses Handbuch wurde von 33 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 17 Bewertungen. Hast du eine Frage zu OSD Audio NERO FS800 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
1 2
NERO FS800 SUBWOOFER INSTALL GUIDE
Cut and prepare a hole to install
the NERO FS800 into a stud bay
where it can be securely mount to
both wall studs.
Once in place the NERO FS800
should be tested before securely
mounting and moving onto step 3.
grille system by simply laying it
into place.
3
Preparation:
Tools For Installation Speaker Wire Guide
- Pencil
- Drill
- Tape Measure
- Wire Cutter
- Phillips Screwdriver
- Utility Knife
- Safety Eye Wear
- Gloves
- Sandpaper
18AWG minimum - for distances up to …………………. 10 ft
16AWG - from …………………………………..…... 10 to 50 ft
14AWG - from …………………………………...… 50 to 100 ft
Installation:
Cut Out
NOTE: This is the most important part of the entire installation.
If you are not certain whether any obstructions exist behind the
desired mounting area, you should start by cutting a small hole in
the center of your penciled mounting hole with a drywall saw.
Using the Cut Out dimensions measure and trace a template on the
wall in the desired location. Cut along the traced line using a drywall
saw or rotary drill. Use a piece of sandpaper to sand down the cut out
edge for a smoother contour. (See Diagram 1.)
Diagram 1


Produktspezifikationen

Marke: OSD Audio
Kategorie: Subwoofer
Modell: NERO FS800

Brauchst du Hilfe?

Wenn Sie Hilfe mit OSD Audio NERO FS800 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten