PAC MCI-GM53 Bedienungsanleitung

Lies die bedienungsanleitung für PAC MCI-GM53 (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 42 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 21.5 Bewertungen. Hast du eine Frage zu PAC MCI-GM53 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Multi Camera Input Interface

for select General Motors Vehicles

© 2019 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.

PAC-audio.com

C

Page 1

Rev. V2

Date: 072419

MCI-GM53

The MCI-GM53 will allow the addition of a reverse, blind spot, and one more additional camera in vehicles equipped

with the 7” screen.

Introduction and Features

Important Notes

1. Compatible build code: IOB. Incompatible build codes: IOA, IO4, IO5, and IO6 . Build codes can be found on a silver sticker either in

the glove box or by scanning the QR code in the driver door frame.

2. If you change the DIP switch settings, you must disconnect and reconnect power for the change to take e󰀨ect.

3. It is very important that you make all connections with the key in the o󰀨 position.Failure to do so will result in the factory

touchscreen becoming unresponsive. If you do make the connections with the key on, you must turn the vehicle o󰀨, shut all doors, and

leave it alone for 5 minutes. After 5 minutes, turn the key back on, and the interface should operate as intended.

4. If you are installing this interface strictly to add a reverse camera, please note that the blind spot inputs will need to be disabled by

entering the menu and manually disabling the inputs (see page 3, step 3 for details).

What’s Included

NumberDescriptionReplacement Part Number

1ModuleMCI-GM53

2Mounting BracketGMSWRBRKT

3Video Input Harness BSM2-CEH

4VBM HarnessBSM1-TMON-HAR V2

5Power HarnessBSM2-PTH

6LVDS HarnessBSM1-LVDS

7

Foam Padding/

Mounting Screws

Miscellaneous

Produktspezifikationen