Regina Andrew Montecito 17-1031 Bedienungsanleitung

Lies die bedienungsanleitung für Regina Andrew Montecito 17-1031 (1 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 17 Personen als hilfreich bewertet und erhielt im Schnitt 4.2 Sterne aus 6 Bewertungen. Hast du eine Frage zu Regina Andrew Montecito 17-1031 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

ITEM NO: 17-1031

ITEM NO: 17-1031

ITEM NO: 17-1031

ITEM NO: 17-1031 ITEM NO: 17-1031

Montecito Up-Down

Montecito Up-Down

Montecito Up-Down

Montecito Up-Down Montecito Up-Down Outdoor Sconce

Outdoor Sconce

Outdoor Sconce

Outdoor Sconce Outdoor Sconce

WE STRONGLY RECOMMEND INSTALLATION BY A LICENSED ELECTRICIAN.

WE STRONGLY RECOMMEND INSTALLATION BY A LICENSED ELECTRICIAN.

WE STRONGLY RECOMMEND INSTALLATION BY A LICENSED ELECTRICIAN.

WE STRONGLY RECOMMEND INSTALLATION BY A LICENSED ELECTRICIAN.WE STRONGLY RECOMMEND INSTALLATION BY A LICENSED ELECTRICIAN.

These instructions are provided for your safety. It is very important that they are read completely before

beginning the installation of your fixture.

ASSEMBLY I

ASSEMBLY I

ASSEMBLY I

ASSEMBLY IASSEMBLY INSTRUCTION:

NSTRUCTION:

NSTRUCTION:

NSTRUCTION:NSTRUCTION:

A. FOR WIRING DIRECTLY INTO OUTLET BOX (Figure 1)

1. Remove steel retainer from lamp back plate by removing the attachment screws

on the side of the backplate and attach the retainer to the outlet (junction) box.

Adjust the retainer so that the tabs on the side are level.

2. Connect the wires of lamp to the wires of outlet box; a. black outlet--wire to box

black or smooth lamp wire; b. white outlet--wire to black or smooth lamp wire; box

c. bare “grounding” outlet-b-wire to green wire. ox

3. Install lamp to the steel retainer using two at-head screws.

B. FOR ADDING THE SHADE AND BULB (Figure 2)

1. Unscrew the glass shades.

2.an appropriately rated bulb into the socket Insert .

3. Screw on the glass shades. Note: The glass shade with open end should an

always be assembled on the lower socket, facing downward.

MOUNTING FIXTURE(S) OUTDOOR AND/OR IN A WET LOCATION INSTRUCTION

1. Mounting surface should be clean, dry, flat, and ¼” larger than the canopy/fixture

base on all sides. Any gaps larger than 3/16” should be corrected.

2. With a silicone caulking compound (not included), caulk completely around where

the back of the canopy/back plate meets the wall surface.

CAUTION:

CAUTION:

CAUTION:

CAUTION: CAUTION: FAILURE TO COMPLETELY CAULK AROUND THE LIGHT FIXTURE’S MOUNTING

PLATE COULD RESULT IN WATER SEEPAGE INTO THE LIGHT FIXTURE AND/OR JUNCTION

BOX.

Made in China

Made in China

Made in China

Made in ChinaMade in China

Produktspezifikationen