TP-Link Omada Pro S4500-8GP Bedienungsanleitung
Seiten 2 Engels Schalten
Lies die Bedienungsanleitung für TP-Link Omada Pro S4500-8GP kostenlos online oder lade das PDF herunter. 40 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
© 2023 TP-Link 7106510430 REV1.0.0
Omada Pro Gigabit Smart Switch
1. To access the management page of the switch, open a browser and type
the switch’s IP address in the address eld, then press the Enter key.
If the switch obtains IP address from the DHCP server (typically a router), nd
the switch’s IP address on the DHCP server.
If not, use the default IP address to launch the switch’s 192.168.0.1
management page.
Note: Make sure the switch and computer are in the same subnet.
2. admin Enter for both the username and password in the lower case letters
to log in. The rst time you log in, change the password to better protect
your network and devices.
3. After a successful login, the main page will appear. You can click the menus
on the top side and left side to congure the corresponding functions.
Installation Guide
Conguration
LED Explanation
For the detailed congurations, refer to the User Guide and CLI Guide. The
guides can be found on the download center of our ocial website:
https://www.tp-link.com/support/download/.
Method 1: Standalone Mode
Switch PC
In Standalone Mode, use a computer to congure and manage the switch.
The switch supports two conguration methods:
Standalone Mode: Congure and manage the switch singly.
Controller Mode: Congure and manage the network devices centrally. It is recommended in the large-scale network, which consists of mass devices such as
access points, switches, and gateways.
Note: When the switch is changed from Standalone Mode to Controller Mode, congurations of the switch will be lost. For details, refer to the related documents on the download center of our
ocial website: https://www.tp-link.com/support/download/.
Note:
1. PoE ports can also connect to non-PoE devices, but only transmit data.
2. Maximum PoE power is 30 W for each PoE port, and 62 W (for S4500-8GP)/61 W (for S4500-8GP2F) for all PoE ports.
3. PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as
a result of client limitations and environmental factors.
For simplicity, we will take S4500-8GP2F for example throughout the Guide.
Note:
1. Port 8 is a PD (Powered Device) port that supports being powered by a PSE (Power Sourcing Equipment) which
complies with LPS or PS2 standard and 802.3af/at standard.
2. The DC power input takes precedence over the PD port. If the DC input fails, the PoE input on the PD port will
supply power instead.
Ethernet Ports (1–8)
AC Power Cord
DC Power Adapter
Internet
PC
PSE
LED SExplanationtatus
P erow
OnPower on
S temys
FF Systlashinglashing: em running normally
Link/Act
(port 1–8)
On (Green)Running at 1000 Mbps
On (Yellw)Running at 10/100 Mbpso
FTransmitting/receiving datalashing
No connected device
SPF1/SFP2
(For S4500-
8GP2F)
On (Green)Running at 1000 Mbps
On (Yellw)Running at 100 Mbpso
FTransmitting/receiving datalashing
No connected device
PoE Status
(For Port 1-4 of
S4500-8GP/Port
1-8 of S4500-
8GP2F)
OnProviding PoE power
Flashing
Current-ovrt-cirt/Connected erload/Sho cui
to a non-standard PD/Power exceeded the
Not providing PoE Power
PoE MAX
(For S4500-8GP/
S4500-8GP2F)
OnRemaining power supply ≤ 7W
Flashing Remaining powkfor er supply eeps ≤ 7 W
mor tese than 2 minu
Remaining power supply
>7W
Connection for PoE Switch
Ethernet Ports (1–8)
PC IP CameraAPIP Phone
PoE Devices
DC Power Adapter
AC Power Cord
Internet
SFP Slots
Connection for Non-PoE Switch
For simplicity, we will take S4500-8G for example throughout the Guide.
Produktspezifikationen
| Marke: | TP-Link |
| Kategorie: | Schalten |
| Modell: | Omada Pro S4500-8GP |
Brauchst du Hilfe?
Wenn Sie Hilfe mit TP-Link Omada Pro S4500-8GP benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schalten TP-Link
TP-Link TL-SG1210PP Bedienungsanleitung TP-Link Omada SG3210X-M2 Bedienungsanleitung TP-Link Omada Pro S4500-8GP2F Bedienungsanleitung TP-Link Omada SG2005P-PD Bedienungsanleitung TP-Link Omada SG3218XP-M2 Bedienungsanleitung TP-Link Omada Pro S5500-48GP4F Bedienungsanleitung TP-Link Omada DS1018GMP Bedienungsanleitung TP-Link Omada DS108G-M2 Bedienungsanleitung
Alle TP-Link Schalten Bedienungsanleitungen
Beliebt in Schalten
TP-Link Omada Pro S4500-8GHP2F Bedienungsanleitung TP-Link JetStream L2 Managed TL-SG3424 Bedienungsanleitung TP-Link TL-SG605E Bedienungsanleitung
Bedienungsanleitung Schalten
Neueste Bedienungsanleitungen für Schalten
Dahua Technology PFS4218-16ET-240 Bedienungsanleitung AV:link HDX42v2.0 Bedienungsanleitung ZyXEL XS1930-10 Bedienungsanleitung Vemer Quicklux-3F Bedienungsanleitung Planet FSD-504HP Bedienungsanleitung Cudy GS105 Bedienungsanleitung Cambium Networks cnMatrix EX1028 Bedienungsanleitung Cambium Networks cnMatrix TX1012-P-DC Bedienungsanleitung Digitus DN-95320 Bedienungsanleitung Hager JK20210BSD Bedienungsanleitung