TP-Link Omada SG2005P-PD Bedienungsanleitung
Seiten 2 Engels Schalten
Lies die Bedienungsanleitung für TP-Link Omada SG2005P-PD kostenlos online oder lade das PDF herunter. 48 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
© 2023 TP-Link 7106510451 REV1.0.1
Omada Gigabit Smart PoE++ in and PoE+ out Switch
Conguration
Connection
LED Explanation
On: The remaining PoE power is ≤ 7 W
Flashing:The remaining PoE power keeps ≤ 7 W
for more than 2 minutes
O:The remaining PoE power is > 7 W
PoE MAX
PoE Status
For Port 1-4
On: Providing PoE power
Flashing: Current-overload/Short-circuit/Connected
to a non-standard PD/Power exceeded the
user-dened value
O: Not providing PoE Power
For Port 5*
On (Green):Powered by 802.3bt
On (Yellow):Powered by 802.3af/at
O: Power o
*The LED will be on after port 5 is connected to a PoE Power Sourcing
Equipment (PSE) for 2-3 seconds.
The switch supports two conguration methods:
Standalone Mode: Congure and manage the switch singly.
Controller Mode: Congure and manage the network devices centrally. It is recommended in the large-scale network, which consists of mass devices such as
access points, switches, and gateways.
Note: When the switch is changed from Standalone Mode to Controller Mode, congurations of the switch will be lost. For details, refer to the related documents on the download center of our
ocial website: https://www.tp-link.com/support/download/.
Quick Installation Guide
On/O: System running abnormally
Flashing: System running normally
System
On (Green): Connected to a 1000 Mbps device
On (Yellow): Connected to a 10/100 Mbps device
Flashing:Transmitting/receiving data
O: No device is connected to the corresponding
port.
Link/Act
IP CameraIP PhoneAP
Ethernet Ports (1-5)
PoE OUT (1-4)
Powered Device (PD)
Router
LAN PortWAN Port
Internet
PSE
(e.g. PoE Switch, PoE Injector)
Note:
1. SG2005P-PD does not support DC or AC power input. A PSE device needs to be connected to the PoE IN port to provide power for
SG2005P-PD.
2. The PoE OUT ports can also be connected to non-PoE devices, but only transmit data.
3. Maximum PoE power is 30 W for each PoE port, and 6 W/ 19 W/ 44 W/ 64 W PoE power budget for all PoE ports when powered by
802.3af (type 1)/ 802.3at (type 2)/ 802.3bt (type 3, 60 W)/ 802.3bt (type 4, 90 W) respectively.
4. PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of
client limitations and environmental factors.
Mounting
Note: The switch can be pole-mounted or wall-mounted. Follow the steps below for the appropriate installation.
Method 1: Pole Mounting
1. Lead the end of the pole mounting strap through the back of the mounting
bracket.
2. Fix the mounting bracket on the pole and fasten the strap, then secure the
switch into the mounting bracket as shown below.
Method 2: Wall Mounting
1. Place the mounting bracket in the right position. and mark four positions for
the screw holes. Drill four 6 mm holes at the marked positions, insert the
anchors into the holes, align the bracket to the anchors and drive the
self-tapping screws into the anchors through the bracket.
2. Align the mounting bracket and the switch, and secure the switch into the
mounting bracket as shown below.
Mounting
Bracket
ScrewsAnchorsPosition Label
1 2
PoE OUTPoE IN
3 45
Reset
Produktspezifikationen
| Marke: | TP-Link |
| Kategorie: | Schalten |
| Modell: | Omada SG2005P-PD |
Brauchst du Hilfe?
Wenn Sie Hilfe mit TP-Link Omada SG2005P-PD benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schalten TP-Link
TP-Link TL-SG605E Bedienungsanleitung TP-Link TL-SG1210PP Bedienungsanleitung TP-Link Omada SG3210X-M2 Bedienungsanleitung TP-Link Omada Pro S4500-8GP2F Bedienungsanleitung TP-Link Omada Pro S4500-8GP Bedienungsanleitung TP-Link Omada SG3218XP-M2 Bedienungsanleitung TP-Link Omada Pro S5500-48GP4F Bedienungsanleitung TP-Link Omada DS1018GMP Bedienungsanleitung
Alle TP-Link Schalten Bedienungsanleitungen
Beliebt in Schalten
TP-Link Omada Pro S4500-8GHP2F Bedienungsanleitung TP-Link JetStream L2 Managed TL-SG3424 Bedienungsanleitung TP-Link JetStream Smart TL-SL2452WEB Bedienungsanleitung
Bedienungsanleitung Schalten
Neueste Bedienungsanleitungen für Schalten
StarTech.com SV231USBDDM Bedienungsanleitung StarTech.com SV431DVGAU2A Bedienungsanleitung StarTech.com SV431HU34K6 Bedienungsanleitung StarTech.com SV431HDU3A Bedienungsanleitung StarTech.com SV431U3A Bedienungsanleitung StarTech.com SV841DUSBI Bedienungsanleitung StarTech.com SV431USBDDM Bedienungsanleitung StarTech.com SV431UADVI Bedienungsanleitung StarTech.com SV1115IPEXT Bedienungsanleitung StarTech.com SV431USBAN Bedienungsanleitung