V7 UPS1DT550-1N Bedienungsanleitung

Lies die bedienungsanleitung für V7 UPS1DT550-1N (2 Seiten) kostenlos online; sie gehört zur Kategorie UPS. Dieses Handbuch wurde von 49 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 25 Bewertungen. Hast du eine Frage zu V7 UPS1DT550-1N oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

DESKTOP UPS

Installation & Operation

UPS1DT550-1N

UPS1DT750-1N

Product Overview

Operation Display

1. Inspection

The following items are inside the box: UPS Unit, User Manual

•Remove the UPS from its package and inspect it for damage that may have occurred during

shipping. If any damage is discovered, re-pack the unit and return it to the place of purchase.

2. Connect to Utility Power

•Connect AC power cord to utility power. Then, the UPS will start to charge inside battery. For best

result, charge the battery for 6 hours prior to initial use.

3.Plug in Equipment

•Battery back-up Outlets (5)

•Connect computer and monitor to the “Battery Backup” outlets. These outlets provide battery

backup, EMI ltering, line conditioning, and surge protection. Battery power is automatically

provided in case of power failure.

•Surge-Protected Outlets (5)

•Connect a printer, fax machine, or scanner to the “Surge-protected” outlets. These outlets do not

provide power during power failure.

CAUTION: NEVER connect a laser printer or scanner to the battery backup sockets of UPS. The

equipment may draw signicantly power to overload the UPS

4.Turn On/O the UPS

•To turn on the UPS unit, press the power switch lightly. Then, the LED or LCD will light up. To turn

o the UPS unit, press the power switch again. Then, display will shut o.

1.LCD display or LED indicators

(Please check LED or LCD

section for the details)

2.Power Switch

3. AC input

4. Battery backup

5. Surge-protected outlets

6. USB port

7. RJ11/RJ45 in/out

UPS ModeDescriptionLCD

UPS Power ONWhen UPS is powered on, it will

enter this mode for 4 seconds

AC Mode

LCD information will be displayed

in the following order when LCD is

touched.

1. Output voltage

2. Input voltage

3. Load Level

4. Battery capacity

Overload in AC mode

icon will ash

When overload occurs, alarm will

beep every 0.5 seconds

Battery Mode

When batter level is low.

icon will ash.

Alarm will beep every 10 seconds

and LCD information will be

displayed in the following order

when LCD is touched

1. Output voltage

2. Input voltage

3. Load Level

4. Battery capacity

Overload in battery mode

icon will ash

When overload occurs, alarm will

beep every 0.5 seconds

*NOTE: If backlight shuts o, you may activate it by touching the screen

LED IndicatorsUPS1DT550-1N only

UPS1DT750-1N only

LEDAlarmUPS Status

GreenOFF The mains is normal and

UPS is operating normally

YellowSounds every 10 secondsPower failure occurs and

UPS is on battery mode

YellowSounds every secondLow Battery

GreenOFFUPS is o

RedContinuously SoundsUPS fault

LED on LED o LED Flashing

5.Install software (Optional for advanced users)

For optimal computer system protection, install UPS monitoring software to fully congure the UPS

system. Please follow steps below to download and install monitoring software.

1.Go to the website http://www.V7-world.com/downloads

2. Select ViewPower software for your operating system to download the software.

3. Follow the on-screen instructions to install the software.

Produktspezifikationen