Valcom VIP-422A-SA-V4 Bedienungsanleitung
Valcom
Lautsprecher
VIP-422A-SA-V4
Lies die bedienungsanleitung für Valcom VIP-422A-SA-V4 (3 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 26 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 13.5 Bewertungen. Hast du eine Frage zu Valcom VIP-422A-SA-V4 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/3
1 947713
CAUTION: To reduce the risk of electric shock,
Do not remove cover (or back).
No user serviceable parts inside.
Refer servicing to qualied service personnel.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
Issue 2
VIP- - , VIP- - - 422A SA 422 SA V4
Intrado Revolution
®
Compliant
LAY- TALKBACK IP CEILING SPEAKER IN
INTRODUCTION
The VIP-422A- and VIP- - - are Intrado SA 422 SA V4
Revolution Compliant - Talkback IP Ceiling Lay In
Speakers, enabling voice access to single zones of
paging over an IP-based network. The speaker
output level is controlled by the Revolution server.
The lay-in ceiling speaker grille is made of steel
with a white baked enamel nish. The VIP- 2A-42
SA . Power is provided replaces a 2’ x 2’ ceiling tile
to the unit via a Power over an Ethernet (PoE)
switch meeting the 802.3af specication. The -V4
model is identical in t, form and function to the non
-V4 model.
SPECIFICATIONS
Access Methods
• Intrado Revolution Server
• SIP enabled telephone system –
• Valcom M Cast Page Group
Features
• Full Duplex Communication (-V4 only)
• Ambient Noise Adjustment (-V4 only)
• Power over Ethernet (PoE) 802.3af compliant
• High E iciency Class-D Amplier ff
Environment
Temperature: 0 to +40° C
Humidity: 0 to 85% non-precipitating
These products are intended for use with a UL
Listed power source marked “Class 2” or “LPS”
rated 24VDC, or 48VDC (PoE).
PoE and all interconnected ITE are intended for
intra-building.
Dimensions/Weight
• 23. L x 23. W x D 75” 75” 3.75”
(60.33 cm) x (60.33 cm) x (9.53 cm)
• Weight: 5.5 lbs. (2.49kg)
FCC Information
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates uses,
and can radiate radio frequency energy and if
not installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area
may cause harmful interference in which case
the user will be required to correct the
interference at his own expense.
Produktspezifikationen
| Marke: | Valcom |
| Kategorie: | Lautsprecher |
| Modell: | VIP-422A-SA-V4 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Valcom VIP-422A-SA-V4 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Lautsprecher Valcom
29 November 2025
25 November 2025
8 Oktober 2025
25 September 2025
1 August 2025
1 August 2025
1 August 2025
1 August 2025
1 August 2025
1 August 2025
Bedienungsanleitung Lautsprecher
- Martin Audio
- Massive
- Cabasse
- Qriom
- Goal Zero
- Avante
- Ferguson
- S-Digital
- Polk Audio
- Greadio
- Thiel
- Nyne
- Dell
- Premier Mounts
- Roswell
Neueste Bedienungsanleitung für -Kategorien-
21 Januar 2026
21 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
19 Januar 2026
19 Januar 2026
19 Januar 2026
19 Januar 2026