Vaxcel Ellis P0375 Bedienungsanleitung

Lies die bedienungsanleitung für Vaxcel Ellis P0375 (2 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 4.2 Sterne aus 8 Bewertungen. Hast du eine Frage zu Vaxcel Ellis P0375 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

P0375

Hardware Package (included):

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

Mounting Screw (B)

Wire Connector (C)Bolt Nut (D)

Mounting Plate Unit (A)

Turn off the power at fuse or circuit box

Installation Steps

1. Attach the mounting plate unit (A) to the

outlet box by using two mounting screws (B).

2. Adjust the arms of the fixture according to picture on

the package.

3. Rod Connections:

a. Thread the fixture wire from the fixture

through the lower rod, then secure the

lower rod onto fixture using the threaded pipe.

b. Thread the fixture wire through the middle

rod and then secure the middle rod onto

the lower rod using the threaded pipe.

c. Thread the fixture wire through the

upper rod, then secure the upper

rod onto the middle rod using the

threaded pipe.

Note: Length adjustable from 23-3/4" to 68-3/4".

Use fewer rods if shorter length is desired.

4. Thread the fixture wire through the canopy kit, then secure the rod assembly to the set threaded pipe of the

canopy kit.

Canopy Kit

Bolt Nut (D)

Upper Rod

Threaded Pipe

Threaded Pipe

Middle Rod

Threaded Pipe

Lower Rod

Arm

Fixture

House Ground Wire

Fixture Ground Wire

Fixture Mounting Screw

Wire Connector (C)

Mounting Plate Unit (A)

Green Ground Screw

Mounting Screw (B)

Outlet Box

Max.60W Type B Bulb

(not included)

220228

Produktspezifikationen