Vaxcel Rogers Park T0734 Bedienungsanleitung

Lies die bedienungsanleitung für Vaxcel Rogers Park T0734 (12 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.2 Sterne aus 3 Bewertungen. Hast du eine Frage zu Vaxcel Rogers Park T0734 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

T0734 / T0735

Maximum Wattage: 60W Bulb

Working Temperature: - 22°F~113°F

1. Read all instructions carefully before installation and

operation.

2. If you are not familiar with state and local electrical codes,

it is recommended that you consult with a qualified

electrician.

3. Before installation, shut off power at the main fuse or

circuit breaker box. Be aware that simply turning off the

wall switch is not sufficient to prevent an electrical shock.

4. This fixture requires a 120V AC, 60 Hz power source.

5. Do not attempt to take the lantern apart; there are no

serviceable parts inside.

6. To avoid sensor damage by lightning or electrical surge,

make sure the ground wire is securely connected.

7. For general safety and to avoid any possible damage to

the sensor, be sure the power is switched "off" before

replacing the bulb.

8. Compatible with most LED dimmable bulbs.

Hardware Package (included)：

Important to Know

Features

W

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. Read

and save these instructions.

Page 1 / 4

1. Energy saving fixture.

2. When in manual override mode, use wall switch

to keep the light ON till dawn.

Mounting Screw (B)

Wire Connector (C)Bolt Nut (D)

Mounting Plate Unit (A)

Rubber Pad (E)

Wire Connector (C)

House Ground Wire

Outlet Box

Mounting Screw (B)

Green Ground Screw

Fixture Mounting Screw

Mounting Plate Unit (A)

Fixture Wire

Fixture Ground Wire

Rubber Pad (E)

Bolt Nut (D)

Backplate

Threaded Pipe

Rubber Pad-a

Dome

Bolt Nut-a

Max. 60W Type A Bulb

(not included)

WARNING: Turn off the main power at circuit breaker before installing fixture.

231011

Produktspezifikationen