Vaxcel Sodo T0672 Bedienungsanleitung

Lies die bedienungsanleitung für Vaxcel Sodo T0672 (192 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.1 Sterne aus 7 Bewertungen. Hast du eine Frage zu Vaxcel Sodo T0672 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Page 1 / 4

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2.READ AND SAVE THESE INSTRUCTIONS.

T0672

Important to Know:

1. This fixture requires a 120 VAC, 60 Hz power source.

2. For general safety and to avoid any possible damage to the sensor, be sure the power is switched "off "

before adjustment.

3. Motion sensor: turns light ON automatically when motion is detected and turns light OFF automatically

when motion stops.

4. Photocell keeps the light OFF during daylight hours.

5. When in manual override mode, use wall switch to keep the light ON during the night.

Hardware Package (included):

Anchor (B)

Drywall Screw (A)

Decorative Cover (C)

Wall Mounted

Read notes section on page 4-5 for additional

information about mounting location of fixture.

Light fixture and sensor should be mounted as

shown when installed.

Fig.1

Note: Fixture can be wall mounted only.

Maximum Wattage: 13W

Work Temperature: - 4°F~113°F

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

220815

Produktspezifikationen