Vestil LPRO-36-9-4 Bedienungsanleitung

Lies die bedienungsanleitung für Vestil LPRO-36-9-4 (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 2.5 Bewertungen. Hast du eine Frage zu Vestil LPRO-36-9-4 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

12/23/05

10/22/05 23-126-120.doc

V

ESTIL MFG.CO. 1

VESTIL MANUFACTURING CORP.

2999 N. Wayne St., Angola, IN 46703

Ph: 260-665-7586 · Fax: 260-665-1339

E-mail: [email protected] · Website: www.vestil.com

MODEL HPRO-48-42-4/LPRO-48-16-4

Serial number ____________

Assembly / Installation Instructions ………………..… 2

Masonry Instillation Guidelines ……………………….3

Warranty …………………………………….……..…. 4

Routine Maintenance and Safety Checks………………2

Safety Label Identification .............................................4

IMPORTANT NOTES,WARNINGS AND SAFETY INSTRUCTIONS

Ensure that all employees understand and follow the following.

*Failure to read and understand this owner’s manual before using or

servicing the high / low profile guards constitutes a misuse of the

product. All persons who will install or care for this product must be

familiar with this material.

oEnsure that all safety labels stay in place and are legible.

oDo not use the high / low profile guard if any damage is observed.

oThe high / low profile guard is intended for use only on concrete surfaces of

sufficient strength and condition to be adequate for anchoring.

oContact the manufacturer for any needed MSDS information.

oDo not perform any modifications to the high / low profile guard without

the manufacturer’s approval. Failure to receive authorization for

changes to the equipment could void the warranty.

oMaintenance and repairs are to be done only by personnel qualified to

perform the required work. Consideration will not be given for warranty

repair charges without prior written authorization by the manufacturer.

WHEN ORDERING

REPLACEMENT PARTS:

We take pride in using quality

parts on the equipment we

manufacture. We are not

responsible for equipment

problems resulting from the use

of unapproved replacement

parts.

To order replacement or

spare parts for this equipment,

contact the factory.

In any communication with

the factory please be prepared

to provide the machine’s serial

number, which is indicated on

the machine dataplate.

RECEIVING INSTRUCTIONS

It is possible that the unit

could incur damage during

transit.

Inspect the unit closely when

it arrives. If you see evidence

of damage or rough handling to

either the packaging or to the

product when it is being

unloaded, immediately

make a

note of it on the Bill Of Lading!

It is important that you

remove the product’s packaging

upon its arrival to ensure that

there is no concealed damage

or to enable a timely claim with

the carrier for freight damage.

Also verify that the product

and its specifications are as

ordered.

O

WNER

’

S

MANUAL

Produktspezifikationen