Zoeller M264 Bedienungsanleitung

Lies die bedienungsanleitung für Zoeller M264 (8 Seiten) kostenlos online; sie gehört zur Kategorie Wasserpumpe. Dieses Handbuch wurde von 13 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 7 Bewertungen. Hast du eine Frage zu Zoeller M264 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

1

© Copyright 2017 Zoeller

®

Co. All rights reserved.

SECTION: 5.10.300

FM0600

1217

Supersedes

0916

SINGLE PHASE SYSTEM

GENERAL

Pump motor shall be hermetically sealed, submersible type

operating in a high quality dielectric oil for cooling the windings

and for lubrication of the motor bearings and ceramic-carbon shaft

seal. Single phase motor shall have internal automatic resetting,

thermal overload protection. Construction shall be of ______ cast

iron with 100% baked-on powder coated epoxy nish for corrosion

resistance and longer casting durability (or ______ cast bronze).

All fasteners and external metal parts shall be of stainless steel.

Impeller shall be of vortex non-clog design. (Addition noted below.)

Check applicable series:

______ 264 (.4 HP) model pump shall have a P.S.C. motor. Cast

iron switch case, motor housing and pump housing with

plastic impeller and base.

______ 266 (1/2 HP) model pump shall have a split phase motor

with current sensing, starting relay enclosed in switch

housing. Cast iron switch case, motor housing and pump

housing with plastic impeller and base.

______ 267 (1/2 HP) model pump shall have a split phase motor with

current sensing, starting relay enclosed in switch housing.

______270 (1 HP) cast iron series pump shall have a permanent

split cpacitor motor with capacitor enclosed in the upper

housing attached to the pump. The impeller shall be cast

bronze. Motor housing shall be cast iron.

______ 4270 (1 HP) cast iron series pump with double carbon/

ceramic shaft seals shall have a permanent split capactior

motor with capacitor enclosed in the upper housing attached

to the pump. The impeller shall be cast bronze. Motor

housing shall be cast iron. The lower seal cavity shall be

oil lled.

SPECIFICATIONS

SEWAGE/SUMP SIMPLEX SYSTEM

ZOELLER COMPANY SUBMERSIBLE OR DEWATERING PUMPS

CAST IRON SERIES

SIMPLEX SYSTEM

Furnish a Zoeller nonautomatic submersible pump(s), Model ______ Single Seal or Model ______ Double Seal, ______ a simplex

control panel or ______ a combination starter. Pumps shall have a capacity of ______ GPM against a Total Dynamic Head of ______

feet. Motor Specication: ______ Voltage, ______ Cycles, ______ Phase, ______ HP. Discharge to be ______ 2” NPT or ______ 3”

NPT or ______ 4” ange (404/4404, 405/4405). Cord length to be ______ feet. Pump shall be mounted on rail system with NPT

______ or ange ______ discharge. Pumps will pass ______ 2” solids (264, 266, 267, 270/4270, 282/4282, 284/4284, 292/4292,

293/4293, 294/4294, 295/4295) or ______ 3” solids (404/4404, 405/4405). Pumps shall be ______ UL Listed, ______ CSA approved,

______ SSPMA certied, ______ State of Wisc. approved, ______ other (Specify ____________________________________).

______ 282 (1/2 HP) cast iron series pump shall have a permanent

split capacitor motor with run capacitor enclosed in the

upper housing attached to the pump. Impeller and motor

housing shall be cast iron. The motor housing shall be

nned for extra cooling capability.

______ 284 (1 HP) cast iron series pump shall have a permanent

split capacitor motor with run capacitor and, on automatic

units, a magnetic contactor enclosed in the upper housing

attached to the pump. Impeller and motor housing shall

be cast iron. The motor housing shall be nned for extra

cooling capability.

______ 4282 (1/2 HP) ______4284 (1 HP) cast iron series pump with

double carbon/ceramic shaft seals shall have a permanent

split capacitor motor with run capacitor enclosed in the

upper housing attached to the pump. Impeller and motor

housing shall be nned for extra cooling capability. The

lower seal cavity shall be oil-lled.

______292 (1/2 HP) _____293 (1 HP) _____294 (1/2 HP) _____295

(2 HP) cast iron series pump shall a permanent split capacitor

motor with capacitor and, on automatic units, a magnetic

contactor enclosed in the upper housing attached to he

pump. The impeller shall be cast iron. Motor housing shall

be cast iron and nned for extra cooling capability.

______4292 (1 HP) _____4293 (1 HP) _____4294 (1-1/2

HP) _____4295 (2 HP) cast iron series pump with double

carbon/ceramic shaft seals shall have a permanent split

capacitor motor enclosed in the upper housing attached to

the pump. The impeller shall be cast iron. Motor housing

shall be cast iron and nned for extra cooling capability.

The lower seal cavity shall be oil lled.

SINGLE SEAL264266267270282284292293294295404405

DOUBLE SEAL427042824284429242934294429544044405

Product information presented

here reflects conditions at time

of publication. Consult factory

regarding discrepancies or

inconsistencies.

MAIL TO: P.O. BOX 16347 • Louisville, KY 40256-0347

SHIP TO: 3649 Cane Run Road • Louisville, KY 40211-1961

TEL: (502) 778-2731 • 1 (800) 928-PUMP • FAX: (502) 774-3624

Visit our web site:

zoellerpumps.com

Produktspezifikationen