Golden Lighting Hidalgo 1051-5 Bedienungsanleitung

Seiten 1 Beleuchtung

Lies die Bedienungsanleitung für Golden Lighting Hidalgo 1051-5 kostenlos online oder lade das PDF herunter. 9 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage

PDF herunterladen (0.2 MB) Technische Daten

Assembly Instructions: (Hidalgo)1051-5

IMPORTANT:

•ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.

•SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!

•USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!

PREPARING FOR INSTALLATION

Remove all of the contents from the carton. See the important notes above. Shut off

thepoweratthecircuitbreakerandcompletelyremovetheoldxturefromtheceiling,

including the old mounting strap.

From the parts bag remove the mounting strap assembly. One end of nipple (F) should

beattachedtomountingstrap(A)withwasherandhexnut(C,D)inplace.Theother

end should have canopy loop (H) attached. Attach mounting strap (A) to the junction

boxusingmountingscrews(B)andascrewdriver.Tightensecurely.Unscrewcanopy

loop collar (I) from canopy loop (H). Pass canopy (G) over the mounted canopy loop

totesttheheight.Approximatelyhalfofthecanopyloop’sexteriorthreadsshouldbe

exposed,andthecanopyloopcollarshouldtsnuglyontothecanopyloop.Remove

canopy (G) and adjust the height of nipple (F) and canopy loop (H) until the desired

height is reached.

ASSEMBLING THE FIXTURE

Takethexture’sbodyoutofthebox.Arms(N)ofthextureareclosedinthe

packaging. Gently spread the arms until they are evenly spaced. Place center ring

(T) up to arms (N) and line up the holes in metal clip (S) of the center ring so that

they pass over screw posts (R). Secure the ring to the arms by threading deco nut

(U)ontoscrewpost(R).Toploop(L)maybeonthexture’swires,butnotthreaded

ontothexture’sframeatpost(M).Ifitisnotconnected,pullthexture’swires

throughtoploop(L)beforetwistingtoploop(L)ontopost(M)ofthexture’sbody.By

measuring,determinethecorrectnumberofchainlinksneededforproperhanging

height.Ifnecessary,useapairofplierstoopenandremoveanyexcesschain.Attach

chain connectors (K) to each end of chain (J) before attaching one end of the chain

connector/chain to top loop (L). Close the chain connector. Connect the other chain

connector(K)tocanopyloop(H).Feedthexture’swiresupthroughtoploop(L)then

through chain (J) (every three links or so). Pull the wires until taut. Slide canopy loop

collar (I) and canopy (G) onto the chain/wire.

CONNECTING THE WIRES

Haveanassistantsupporttheweightofthexturewhilecompletingthewiring.Cut

awayexcesswire.Threadthexture’swiresthroughcanopyloop(H)andnipple(F).

Attachthexture’swirestothepowersupplywiresfromthejunctionbox.Connect

black to black (or smooth); white to white (or ribbed); ground to ground (green or

copper).Twisttheendsofthewirepairstogether,andthentwistonawireconnector.

Make sure all twists are in the same direction. If there is no ground wire (green or

copper)comingfromthejunctionbox,locategroundscrew(E)onmountingstrap

(A)andwrapthexture’sgroundwirearoundthegreengroundscrew(E).Usea

screwdriver to secure ground screw (E) onto the mounting bracket. Tuck all wires

neatlyintothejunctionbox.

FINISHING THE INSTALLATION

Push canopy (G) up to the ceiling and slide canopy loop collar (I) up beneath the

canopy. Tightly thread canopy loop collar (I) onto canopy loop (H) to secure canopy (G)

in place.

Slide glass shade (P) over socket (Q) and secure in place with socket ring

(O).Installlightbulbs(notprovided)inaccordancewiththexture’sspecications.

Donotexceedthemaximumrecommendedwattage.

Yourinstallationisnowcomplete.Turnonthepowerandtestthexture.

CLEANING TIPS

Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the

xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.

For Customer Service, contact

the place of purchase to arrange

for replacement parts.

BLACK

(Hot)

WHITE

(Neutral)

GREEN

(Ground)

HOUSE WIRES

SMOOTH

(Or Black)

FIXTURE WIRES

RIBBED

(Or White)

BARE COPPER

(Or Green)

Bewerten Sie dieses Handbuch

Produktspezifikationen

Marke:	Golden Lighting
Kategorie:	Beleuchtung
Modell:	Hidalgo 1051-5

Brauchst du Hilfe?

Wenn Sie Hilfe mit Golden Lighting Hidalgo 1051-5 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Bedienungsanleitung Beleuchtung Golden Lighting

Golden Lighting Dixon 3218-SF Bedienungsanleitung Golden Lighting Calla 3160-6 Bedienungsanleitung Golden Lighting Remy 0314-1W Bedienungsanleitung Golden Lighting Orwell 3306-FM Bedienungsanleitung Golden Lighting Bijoux 1998-8SF Bedienungsanleitung Golden Lighting Reeva 2122-1W Bedienungsanleitung Golden Lighting Mercer 4309-M3 Bedienungsanleitung Golden Lighting Camden 6085-FM Bedienungsanleitung

Alle Golden Lighting Beleuchtung Bedienungsanleitungen

Beliebt in Beleuchtung

Golden Lighting Smyth 2073-4 Bedienungsanleitung Golden Lighting Hines 3118-4SF Bedienungsanleitung Golden Lighting Regent 1210-6 Bedienungsanleitung

Bedienungsanleitung Beleuchtung

Neueste Bedienungsanleitungen für Beleuchtung

IKEA SAMBORD 305.869.62 Bedienungsanleitung Robert Abbey 1591 Bedienungsanleitung Robert Abbey Z348 Bedienungsanleitung Robert Abbey CF42X Bedienungsanleitung IKEA MOLNART 106.133.44 Bedienungsanleitung IKEA MOLNART 906.212.03 Bedienungsanleitung Robert Abbey 1823 Bedienungsanleitung Robert Abbey A357X Bedienungsanleitung Robert Abbey CI41X Bedienungsanleitung Robert Abbey S1306 Bedienungsanleitung