Klein Tools CL100 Bedienungsanleitung
Klein Tools
Messung
CL100
Lies die bedienungsanleitung für Klein Tools CL100 (8 Seiten) kostenlos online; sie gehört zur Kategorie Messung. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 2 Bewertungen. Hast du eine Frage zu Klein Tools CL100 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/8
CUSTOMER SERVICE
KLEIN TOOLS, INC.
450 Bond Street
Lincolnshire, IL 60069
1-877-775-5346
customerservice@kleintools.com
www.kleintools.com
139557T Rev. 11/13 B
ENGLISH
• AUTO / MANUAL
RANGE
• MAX HOLD
• DATA HOLD
• 3-1/2 DIGIT
1999 COUNT LCD
• BACKLIGHT
• WORKLIGHT
A
AC
CL100
AUTO
WARRANTY
www.kleintools.com/warranty
CLEANING
Turn instrument off and disconnect test leads. Clean the instrument by using
a damp cloth. Do not use abrasive cleaners or solvents.
STORAGE
Remove the batteries when instrument is not in use for a prolonged period of
time. Do not expose to high temperatures or humidity. After a period of storage
in extreme conditions exceeding the limits mentioned in the Specifications
section, allow the instrument to return to normal operating conditions before
using it.
DISPOSAL / RECYCLE
Caution: This symbol indicates that equipment and its accessories
shall be subject to a separate collection and correct disposal.
ENGLISH
Diode Test
Forward DC Current Resolution Reverse DC Voltage
Appx. 1mA 0.001V Appx. 1.5V
Continuity Test
Overload Protection Resolution Open Circuit Voltage
250V
0.1mΩ
Appx. 0.45V
ELECTRICAL SPECIFICATIONS
DC Voltage Measurement
Range Resolution Accuracy
200mV 0.1mV
± (0.8% + 2 digits)
2V 0.001V
20V 0.01V
200V 0.1V
600V 1V ± (1.0% + 2 digits)
Overload Protection:
• 200mV range: 250V DC / AC RMS
• 2V-600V ranges: 600V DC / AC RMS
Input Impedance: 10M
Ω
AC Voltage Measurement
Range Resolution Accuracy
200mV 0.1mV ± (1.0% + 10 digits)
2V 0.001V
± (1.0% + 5 digits)20V 0.01V
200V 0.1V
600V 1V ± (1.5% + 5 digits)
Overload Protection:
• 200mV range: 250V DC / AC RMS
• 2V-600V ranges: 600V DC / AC RMS
Input Impedance: 10MΩ
Response: Averaging
AC Current Measurement
Range Resolution Accuracy
2A 0.001A ± (3.5% + 20 digits)
≤
0.5A
2A 0.001A ± (3.0% + 10 digits)
>
0.5A
20A 0.01A ± (3.0% + 10 digits)
200A 0.1A ± (2.5% + 10 digits)
600A 1A ± (1.5% + 5 digits)
Frequency Range: 50 to 60Hz
Response: Averaging
Resistance Measurement
Range Resolution Accuracy
200Ω 0.1Ω
± (1.2% + 2 digits)
2k
Ω 0.001kΩ
20kΩ 0.01kΩ
200kΩ 0.1kΩ
2MΩ 0.001MΩ
20MΩ 0.01MΩ
± (2.0% + 5 digits)
Overload Protection: 250V
Open Circuit Voltage: 0.25V
Dwg Name: CL100-139557TART Dwg No: 139557T
ECO No: 15429 Pkg Dwg Ref: 1650 Rev: B
Color Reference: N/A
Instruction Manual
CL100
600A
600V
CL100 Instructions - MASTER.indd 1-4 12/16/2013 12:13:45 PM
ENGLISH
A
AC
CL100
AUTO
B
I
C
D
G
I
H
F
E
A
1
CL100
1
3
4
2
On Back
AUTO
A
AC
AUTO
A
AC
PRESS
AUTO
A
AC
AUTO
A
AC
AUTO
A
AC
FEATURE DETAILS
CL100
Instruction Manual
GENERAL SPECIFICATIONS
The Klein Tools CL100 is a multi-featured clamp meter. It measures AC / DC
voltage, AC current, and resistance. It can also test diodes and continuity.
• Operating Altitude: 2000 meters
• Relative Humidity: 75% max
• Operating Temperature: 32°F ~ 104°F (0°C~ 40°C)
• Storage Temperature: 10°F ~ 122°F (-10°C ~ 50°C
• Accuracy Temperature: 64°F ~ 82°F (18°C ~ 28°C)
• Temperature Coef cient: 0.1
*
(specified accuracy) / °C
• Sampling Frequency: 2.5 samples per second
• Dimensions: 8" x 3" x 1" (203 mm x 76 mm x 25 mm)
• Weight: 10 oz. (283 g)
• Calibration: Accurate for one year
• Safety Rating: CAT III 600V
• Accuracy: ± (% of reading + # of least significant digits)
WARNINGS
To ensure safe operation and service of the tester, follow these instructions.
Failure to observe these warnings can result in severe injury or death.
• Before each use, verify meter operation by measuring
a known voltage or current.
• Never use the meter on a circuit with voltages that exceed the
category based rating of this meter.
• Do not use the meter during electrical storms, or in wet weather.
• Do not use the meter or test leads if they appear to be damaged.
• Ensure meter leads are fully seated, and keep fingers away from
the metal probe contacts when making measurements.
• Do not open the meter to replace batteries while the probes
are connected.
• Use caution when working with voltages above 60V DC,
or 25V AC RMS. Such voltages pose a shock hazard.
• To avoid false readings that can lead to electrical shock,
replace batteries if a low battery indicator appears.
• Unless measuring voltage or current, shut off and lock out
power before measuring resistance or capacitance.
• Always adhere to local and national safety codes. Use individual
protective equipment to prevent shock and arc blast injury where
hazardous live conductors are exposed.
SYMBOLS
~
AC Alternating Current Warning or Caution
DC Direct Current Dangerous levels
DC/AC Voltage or Current Double Insulated Class II
Ground
Safe for disconnect
from live conductors
AC Source
A. Use CAT III rated leads or higher.
Do not attempt to measure more than 600V or
any current on lead input.
B. Keep hands below line when measuring high current levels.
C. Select Functionality Button
• Switch between AC and DC.
• Switch between
and .
D. Max Hold
• Press to hold the maximum value on the display.
• Press again to return to live reading.
E. Auto/Manual Range
• Press repeatedly to cycle through manual ranges.
• Hold for 2 seconds to return to auto ranging mode.
•
AUTO
is displayed on LCD only during auto ranging mode.
F. Data Hold
• Press to hold the current input on the display.
• Press again to return to live reading.
G. H. Battery Replacement
• When
indicator is displayed on the LCD,
batteries must be replaced.
• Remove the back screw and replace 3 x AAA batteries.
I. Backlight / Worklight
• Press button to activate worklight and backlight.
• Lights will turn off automatically after 15 seconds.
• Worklight only operates during AC current measurement.
• Using lights drains the battery significantly.
1. AC Current:
<
600A
Features:
HOLD MAX WORKLIGHTRANGE
• Center wire in guides for best accuracy.
• Opposing currents cancel. Use line-splitter (USA only) when necessary.
2. AC / DC Voltage:
<
600V
Features:
HOLD MAX RANGE
• Do not measure resistance on a live circuit.
3. Diode / Continuity
Diode Features:
HOLD
Display shows:
• Forward voltage drop if forward biased.
• “O.L.” if reverse biased.
4. Resistance:
<
20M
Ω
Features:
HOLD RANGE
Continuity Features:
HOLD
• Display shows resistance.
• Buzzer sounds if less than 60
Ω.
• Select AC or DC voltage source.
SYMBOLS USED ON LCD
~
AC Measurement DC Measurement
-
Negative DC Value
MAX
Maximum Reading
Low Battery
AUTO
Auto Range Active
H
Hold Active
A
Current in Amps
V
Voltage Measurement Diode Test
Ω
Resistance in Ohms Continuity Test
m
Milli 10
-3
k
Kilo 10
M
Mega 10
6
Auto Power-Off
• Device will power off after 15 minutes non-use.
• Turn the dial or press a button to wake.
• Press the
HOLD
button while turning on to disable
Auto Power-Off feature.
FUNCTION INSTRUCTIONS
PRESS
AC
DC
TO SELECT
PRESS TO SELECT
Diode
Continuity
Dwg Name: CL100-139557TART Dwg No: 139557T
ECO No: 15429 Pkg Dwg Ref: 1650 Rev: B
Color Reference: N/A
CL100 Instructions - MASTER.indd 5-8 12/16/2013 12:13:47 PM
Produktspezifikationen
| Marke: | Klein Tools |
| Kategorie: | Messung |
| Modell: | CL100 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Klein Tools CL100 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Messung Klein Tools
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
31 August 2025
31 August 2025
31 August 2025
31 August 2025
Bedienungsanleitung Messung
- GQ
- Schneider
- Dahua Technology
- Ansmann
- Extron
- Eurolite
- Pioneer
- Bosch
- Kyoritsu
- Endress+Hauser
- KS Tools
- Crowcon
- Vonroc
- Hama
- Laserliner
Neueste Bedienungsanleitung für -Kategorien-
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
31 August 2025
31 August 2025
31 August 2025
31 August 2025
31 August 2025