Klein Tools CL1100 Bedienungsanleitung
Klein Tools
Messung
CL1100
Lies die bedienungsanleitung für Klein Tools CL1100 (24 Seiten) kostenlos online; sie gehört zur Kategorie Messung. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 2 Bewertungen. Hast du eine Frage zu Klein Tools CL1100 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/24
ENGLISH
www.kleintools.com
Instruction
Manual
For Professionals...Since 1857
®
CL1100
•
DATA HOLD
•
BACKLIGHT
•
WORKLIGHT
•
BAR GRAPH
•
MAX
/
MIN
•
3-3/4 DIGIT
3999 COUNT LCD
•
AUTO / MANUAL
RANGE
•
NON CONTACT
VOLTAGE TESTER
•
TEMPERATURE
ENGLISH
CL1100
Instruction Manual
GENERAL SPECIFICATIONS
The Klein Tools CL1100 is an auto-ranging clamp meter. It measures
AC / DC voltage, AC / DC current, resistance, capacitance, frequency, duty
cycle, and temperature. It can also test non-contact voltage, diodes, and
continuity.
•
Operating Altitude:
2000 meters
•
Humidity:
80% max
•
Operating Temperature:
0°C / 32°F to 45°C / 113°F
•
Storage Temperature:
0°C / 32°F to 60°C / 140°F
•
Accuracy Temperature:
18°C / 64°F to 28°C / 82°F
•
Temperature Coeffi cient:
0.1*(specifi ed accuracy) / °C
•
Dimensions:
8.875" x 3.375" x 1.5"
•
Weight:
10.7oz.
•
Calibration:
Accurate for one year
•
CAT Rating:
CAT III 600V
•
Accuracy:
± (% of reading + # of least signifi cant digits)
WARNINGS
To ensure safe operation and service of the tester, follow these instructions.
Failure to observe these warnings can result in severe injury or death.
•
Before each use, verify meter operation by measuring
a known voltage or current.
•
Never use the meter on a circuit with voltages that exceed the
category based rating of this meter.
•
Do not use the meter during electrical storms, or in wet weather.
•
Do not use the meter or test leads if they appear to be damaged.
•
Ensure meter leads are fully seated, and keep fi ngers away from
the metal probe contacts when making measurements.
•
Do not open the meter to replace batteries while the probes
are connected.
•
Use caution when working with voltages above 60V DC,
or 25V AC RMS. Such voltages pose a shock hazard.
•
To avoid false readings that can lead to electrical shock,
replace batteries if a low battery indicator appears.
•
Unless measuring voltage or current, shut off and lock out
power before measuring resistance or capacitance.
•
Always adhere to local and national safety codes. Use individual
protective equipment to prevent shock and arc blast injury where
hazardous live conductors are exposed.
SYMBOLS
~
AC Alternating Current Warning or Caution
DC Direct Current Dangerous levels
DC/AC Voltage or Current Double Insulated Class II
Ground
Safe for disconnect
from live conductors
AC Source
Produktspezifikationen
| Marke: | Klein Tools |
| Kategorie: | Messung |
| Modell: | CL1100 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Klein Tools CL1100 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Messung Klein Tools
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
Bedienungsanleitung Messung
- Autel
- MGL Avionics
- Weidmüller
- Werma
- Hama
- Dostmann Electronic
- KERN
- Sanwa
- GlowShift
- Oricom
- Amprobe
- Metrel
- Ansmann
- PCE
- Daytronic
Neueste Bedienungsanleitung für -Kategorien-
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025