Kuzco Airen WS92617 Bedienungsanleitung

Kuzco Nicht kategorisiert Airen WS92617

Lies die bedienungsanleitung für Kuzco Airen WS92617 (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.1 Sterne aus 9 Bewertungen. Hast du eine Frage zu Kuzco Airen WS92617 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/1
INSTALLATION SHEET
WS92617
LED Wall Sconce
START FROM HERE
19054 28th Avenue Surrey, BC Canada V3Z 6M3
T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196
W: kuzcolighting.com
Make sure is POWERCOMPLETELY OFF at the fuse box
Have your fixture installed by a qualified licensed electrician
Wear gloves at all time during this installation
Read instructions carefully before you start assembly
Keep this installation sheet for future reference
Technical Support: 1-855-855-8926
Please Note:
This Kuzco LED fixture comes with pre-wired LED module(s)
Unless instructed, Do Not touch any part of the LED module(s) as any unnecessary
contact with the module could cause permanent damage
Use ELV (Electronic Low Voltage) or TRIAC type of dimmer for dimming application
120V input
20230109
1. Remove fixture from its original package
2. Separate mounting plate from canopy by (1c)(2a)
removing canopy screws (2b)
3.
Attach mounting plate to electrical junction box (1c)(1a)
using junction box screws provided in hardware (1e)
package
4. Make proper electrical connections ( to L, blackhot
white to N, to with wire nuts neutralgroundGND)
(1b) provided in hardware package and place driver (4a)
in canopy (2a)
5. Attach canopy to mounting plate with canopy (2a)(1c)
screws (2b)
1a.1b.1c.1e.4a.2a.2b.

Bewerten Sie dieses Handbuch

4.1/5 (9 Bewertungen)

Produktspezifikationen

Marke: Kuzco
Kategorie: Nicht kategorisiert
Modell: Airen WS92617

Brauchst du Hilfe?

Wenn Sie Hilfe mit Kuzco Airen WS92617 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten