Kuzco Taro WS70410 Bedienungsanleitung

Lies die bedienungsanleitung für Kuzco Taro WS70410 (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.2 Sterne aus 6 Bewertungen. Hast du eine Frage zu Kuzco Taro WS70410 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

INSTALLATION SHEET

WS70410

LED Wall Sconce

START FROM HERE

Please Note:

• This Kuzco fixture comes with pre-wired LED module(s)

• Unless instructed, Do Not touch any part of the LED module(s) as any unnecessary

contact with the module could cause permanent damage

• Use ELV (Electronic Low Voltage) or TRIAC type of dimmer for dimming application

• 120V input voltage

1a.1b.1c.1e.4a.2a.2f.

19054 28th Avenue Surrey, BC Canada V3Z 6M3

T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196

W: kuzcolighting.com

1. Remove fixture from its original package

2. Separate mounting plate from canopy (1c)(2a)

by removing set screws with allen key(2f)

3. Attach mounting plate to electrical junction box (1c)(1a)

using junction box screws provided in hardware (1e)

package

4. Make proper electrical connections ( to “L”, blackhot

white to “N”, to with wire nuts neutralground“GND”)

(1b) provided in hardware package and then place

driver inside canopy (4a)(2a)

5. Attach canopy to mounting plate with set (2a)(1c)

screws (2f) and allen key

20210316

• Make sure is POWERCOMPLETELY OFF at the fuse box

• Have your fixture installed by a qualified licensed electrician

• Prepare everything in a clear area

• Wear gloves at all time during this installation

• Read instructions carefully before you start assembly

• Keep this installation sheet for future reference

Technical Support: 1-855-855-8926

Produktspezifikationen