MuxLab 100506 Bedienungsanleitung
Lies die bedienungsanleitung für MuxLab 100506 (2 Seiten) kostenlos online; sie gehört zur Kategorie Empfänger. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu MuxLab 100506 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2
© MuxLab Inc. 20 -000 2-A -000 2-A20 94 93 SE 93
2321 Cohen St, Saint-Laurent, QC Canada H4R 2N7
Tel: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
E-mail: URL: www.muxlab.com info@muxlab.com
Specications
Environment
HDMI 2.0a
Devices
Ultra HD -Ray, projectors, monitors, TV, PC, laptops. Blu
Transmission
Transparent to the user.
Video Bandwidth
18 Gbps
Frequency Range
25 to 600 MHz
Signals
HDMI 2.0a protocol.
HDCP
Revision 1.4 & 2.2 compliant.
Connectors
HDMI receptacle.
Rotary Switch
For setting the EDID to be sent to the source
LEDs
Power: Blue
Input & Output Link: Blue
Resolution
480i to 1080p @ 50/60 FPS
1080p @ 24/50/60 FPS
3840 X 2160 @ 24/25/30/60 FPS
Color
8, 10 & 12 bit
Aud io
LPCM 7.1CH, Dolby TrueHD, Dolby Atmos, DTS-HD Master
Audio and DTS:X
Cable
HDMI cable of appropriate length for video resolution selected.
Power Supply
One (1) 110-240V/5VDC , 1A power supply
Temperature
Operating: 0° to 40°C Storage: -20° to 60°C
Humidity: up to 90% non-condensing
Enclosure
Metal enclosure
Dimensions
6.06” x 2.72” x 0.91” (155 mm x 68 mm x 24 mm)
Weight
1.1 lbs (0.5 Kg)
Compliance
Regulatory: FCC, CE, RoHS
Warranty
1 year
Order Information
1 6 4 HDMI Splitter, 4K/60 0050 1X
1X 4K 00504 MI SplitterHD , /60 (1 6)
Quick Installation Guide
Overview
The HDMI 1x4 Splitter (1 6) allows one (1) HDMI source to be distributed to 0050
up to four (4) HDMI displays. The splitter supports up to 4K (3840 X 2160) video
and HD audio. The splitter is HDCP 1.4 & 2.2 compliant, supports EDID
management and features LED diagnostics Additionally, all connectors are on the .
rear panel for neater cabling. Applications include; commercial and residential AV
systems, classroom projector systems, digital signage, boardroom systems,
collaborative PC systems, medical information systems.
Pre-Installation Check
Identify the connectors as indicated on the product diagram above. LEDs are
located on the front and the connectors and mode switch on the rea r.
Installation
In order to install the 4 HDMI Splitter, please follow the steps below: 1X
1. Connect the HDMI video source to the input HDMI connector of the splitter
with an appropriate HDMI cable.
© MuxLab Inc. 2020
2. Connect the HDMI display equipment to the output HDMI connectors of the
splitter with appropriate HDMI cables.
3. Use the Rotary switch to select the EDID that will be sent to the HDMI source
device as indicated on the Rotary switch table.
4. Connect the 5 VDC power supply to the splitter rst, and then plug the power
supply into an AC power outlet.
5. Power on the HDMI equipment and verify the image quality.
6. The following diagram shows the nal conguration.
Mode Switch Selection
Use the Rotary switch to select the EDID that will be sent to the HDMI source device.
Position
Function
0
Auto (Mix EDID)
1
EDID Ultra-HD (3840X2160@60Hz) 7.1 Audio –
2
EDID Ultra-HD (3840X2160@60Hz) 2.0 Audio –
3
EDID Ultra-HD (3840X2160@30Hz) 7.1 Audio –
4
EDID Ultra- (3840x2160@30Hz) 2.0 Audio HD –
5
EDID Full-HD (1080p, 3D, 12bit 7.1 Audio ) –
6
EDID Full-HD (1080p, 8bit 2.0 Audio ) –
7
EDID 1080i 7.1 Audio –
8
EDID 1080i 2.0 Audio –
9
Learn EDID of the device connected to Output 1 and send it intact to
the input port
Troubleshooting
The following table describes some of the symptoms, probable causes and possible solutions
in regard to the installation of the 4 HDMI Splitter. 1X
Picture/
Sound
Probable Cause
Possible Solution
No Image
Wiring
Check continuity
Check correct wiring
No Image
Synchronization
Power o the source and displays, then power them back on.
Flickering Image
Synchronization
Check HDMI cable length against industry standards.
Choppy Sound
Synchronization
Check HDMI cable length against industry standards.
Noise in image
Weak signal
Check HDMI cable length against industry standards.
Green or pink
hue
HDMI cables
Check HDMI cables and replace as needed.
If you still cannot diagnose the problem, please call MuxLab Customer Technical Support at
877-689-5228 (toll-free in North America) or (+1) 514-905-0588 (International).
Produktspezifikationen
| Marke: | MuxLab |
| Kategorie: | Empfänger |
| Modell: | 100506 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit MuxLab 100506 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Empfänger MuxLab
21 Juni 2025
21 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
29 August 2024
Bedienungsanleitung Empfänger
- Advance Acoustic
- Smartwares
- TIC
- Audioengine
- Marmitek
- Ibanez
- Naxa
- Smart-AVI
- Comprehensive
- FoneStar
- QSC
- Mooer
- NUVO
- Hager
- Logitech
Neueste Bedienungsanleitung für -Kategorien-
21 Juni 2025
21 Juni 2025
21 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025